Best current price£77.95from B&Q
Shopping.co.uk recommended and popular offers
B&Q£77.95Visit shop B&Q - Reject Banded Scaffold Board (T) 36mm (W) 225mm (L) 1.8MPack Of 2
Visit shop4 offers from £77.95 - £143.99
View price history by clicking the chart icon.
These Snowdon Timber Reject Banded Scaffold Boards are intended for DIY enthusiasts and hobbyists looking for budget-friendly wood for non-structural garden projects. They offer a highly cost-effective solution for rustic aesthetic applications, though users should be aware that these boards are factory rejects, meaning they feature cosmetic and structural imperfections that make them unsuitable for professional scaffolding or load-bearing construction work.
| Brand | Snowdon Timber |
|---|
No. These are factory rejects and do not meet the safety or structural standards required for scaffolding.
These boards are typically untreated or carry industrial-grade finishing; it is recommended to apply your own wood preservative if used outdoors.
Blue stain is a cosmetic fungal discoloration that affects the wood's appearance but does not significantly impact its strength for non-structural decorative use.
Yes, they are popular for industrial-style shelving and furniture, though you should sand them thoroughly and seal them to prevent splinters and dirt.
Each order contains 5 individual boards measuring 1.8 meters in length.
Yes, once sanded and cleaned of any dust, these boards will accept wood stains, dyes, or exterior paints.
Use shorter lengths to minimize the appearance of the twist or brace the board against a straight edge during installation.
Always pre-drill pilot holes and avoid placing screws too close to the end of the board.
Use an electric sander with a coarse grit (60-80) followed by a medium grit (120) for a smoother, safer finish.
Before starting your project, inspect each board to identify the best side for visibility. You can sand down rough areas or loose splinters using 80-grit sandpaper for a safer finish. Since this is untreated or factory-grade timber, applying a wood preservative or exterior oil is highly recommended if you intend to leave the boards outdoors, as this will help prevent moisture ingress and slow the decay process. When fastening, use high-quality wood screws and pre-drill pilot holes to minimize the risk of the board splitting further near existing cracks or defects.
