Tetrion Powerfil 2K Filler - 3.5kg - TKK041
Best current price£107.99from B&Q
Best offers
Shopping.co.uk recommended and popular offers
B&Q£107.99Visit shop B&Q - All Purpose Powerefil Filler Wood Stone Concrete Bricks Metal 3.5Kg X3
Visit shopB&Q£107.99Visit shop All Offers
3 offers from £107.99 - £112.99
View price history by clicking the chart icon.
B&QB&Q - All Purpose Powerefil Filler Wood Stone Concrete Bricks Metal 3.5Kg X3
Free delivery in 1–3 days
£107.99
Visit shop
eBayTetrion All Purpose Powerefil Filler Wood Stone Concrete Bricks Metal 3.5kg x3
Free delivery in 1–3 days
£107.99
Visit shop
Tetrion All Purpose Powerefil Filler Wood Stone Concrete Bricks Metal 3.5kg x3Free delivery in 1–3 days£112.99Visit shop →
Product Information
Full details
Tetrion Powerfil 2K Filler is a professional-grade repair solution designed for tradespeople and serious DIY enthusiasts who need a versatile, high-strength filler for wood, metal, stone, and plastics. Its primary benefit is a rapid-setting, durable finish that can be drilled, sanded, and painted, making it ideal for both structural repairs and surface imperfections. The primary caveat is the fast 5-minute working time, which requires efficient application and precise mixing to avoid premature hardening.
All features
| Model Part Number | TKK041 |
|---|---|
| Brand | Tetrion |
Extended Product Information
FAQs
Can I use this filler for automotive repairs?
Yes, it is highly effective on metal surfaces, making it a great choice for filling dents or irregularities on metal substrates.
What happens if I mix too much hardener?
Adding too much hardener will cause the mixture to set too quickly, potentially making it impossible to work with before application is complete.
Is the finished repair water-resistant?
Yes, once fully cured, the filler provides a durable, water-resistant surface suitable for both interior and exterior use.
Can I apply multiple layers?
Yes, once the first layer has cured, you can sand it and apply subsequent layers to build up depth.
Will this work on all types of plastic?
It is compatible with most rigid plastics, but we recommend testing on a small, inconspicuous area to ensure proper adhesion before starting a large project.
Troubleshooting
Filler remains soft after 20 minutes
The mixture ratio was likely incorrect or the ambient temperature is too low. Ensure you are using a 50:1 ratio and perform the work in a room at least 18 degrees Celsius.
Streaks present in the mixed filler
Incomplete mixing will lead to inconsistent curing. Stir the filler and hardener thoroughly until the color is perfectly uniform throughout the batch.
Pros and Cons
Pros
- Extremely versatile across different materials
- Fast cure time increases workflow efficiency
- Hard-wearing, durable, and drillable finish
- Excellent for both large-scale and small repair jobs
Cons
- Requires precise mixing ratios
- Short 5-minute working time can be challenging for beginners
- Cure times are temperature-dependent
Setup, Compatibility & Care
To ensure optimal results, follow these preparation and application guidelines:
- Surface Prep: Surfaces must be clean, dry, and free of grease, oil, or loose debris. Use a degreaser if necessary.
- Mixing Ratio: Use a precise 50:1 ratio of filler to hardener. Mix thoroughly on a non-porous surface until the color is uniform with no streaks.
- Application: Apply the mixture using the included spreader, ensuring the filler is pushed into the void to eliminate air pockets.
- Curing: Allow 20 minutes at 18 degrees Celsius for a full cure before sanding. Note that lower temperatures will extend curing time, while higher temperatures will shorten it.
- Storage: Keep the containers sealed tightly in a cool, dry area when not in use to prevent the base filler from drying out.