Shopping.co.uk

Brass Compression Male Adapter - 6mm x 1/4" BSP - Primaflow

Brass Compression Male Adapter - 6mm x 1/4" BSP - Primaflow

Introducing the Brass Male Adapter - 6mm x 1/4" BSP, perfect for various plumbing needs. This Prim...

Best current price£4.84from eBay

Best offers

Shopping.co.uk recommended and popular offers

Trusted
The Range£5.00Visit shop

Prima Plus Compression Adaptor 6Mm X 1/4" Male Taper - Mpn 21099007 - Premium Brass Fitting - Grey

Visit shop

All Offers

2 offers from £4.84 - £5.00

View price history by clicking the chart icon.

eBayPrimaPlus Compression Adaptor 6mm x 1/4"" Male Taper
Free delivery in 1–3 days
£4.84
Visit shop
The RangePrima Plus Compression Adaptor 6Mm X 1/4" Male Taper - Mpn 21099007 - Premium Brass Fitting - Grey
Free delivery in 1–3 days
£5.00
Visit shop

Product Information

Full details

This Primaflow Brass Compression Male Adapter is designed for plumbing professionals and DIY enthusiasts needing a reliable fitting for water and gas installations. Its key benefit is ensuring a secure, leak-free connection thanks to its premium brass construction and adherence to stringent British standards. A potential consideration is the specific size requirement (6mm to 1/4" BSP), necessitating careful selection for compatibility. Key features include its durable brass material, WRAS approval for drinking water safety, and Kite Mark BS standard compliance.

All features

BrandPrimaflow

Extended Product Information

FAQs

What does WRAS approved mean?

WRAS approval signifies that the fitting has been rigorously tested and meets the Water Regulations Advisory Scheme standards for use with wholesome potable water in the UK.

Can this adapter be used for natural gas lines?

Yes, this fitting is suitable for gas installations as well as water, provided it is installed correctly and meets all relevant gas safety regulations for your area.

What type of pipe does the 6mm side connect to?

The 6mm side is designed for 6mm OD (Outer Diameter) pipe, typically copper or specific plastic compression pipe, using a compression olive.

Do I need any special tools to install this fitting?

You will need two wrenches: one to hold the fitting the adapter is screwing onto, and one to tighten the compression nut. No soldering or pipe sealing compounds are typically required for standard compression fittings.

What is the significance of the Kite Mark?

The Kite Mark is a British Standard certification mark, indicating that the product has been manufactured to meet specific, high-quality British Standards, ensuring reliability and performance.

How tight should I make the compression nut?

A common recommendation is to tighten the nut firmly by hand, then use a wrench to turn it an additional 1/2 to 3/4 of a turn. Overtightening can damage the fitting or pipe, while undertightening can cause leaks. Consult the manufacturer's installation guide if available.

Troubleshooting

Leak at the compression joint

Ensure the olive is correctly seated and the nut is tightened sufficiently. If the leak persists, the pipe may be damaged, or the olive/nut may need replacement. Ensure the 6mm pipe is cut square and clean.

Difficulty tightening the nut

Check for cross-threading on the 1/4" BSP connection. Ensure no debris is present on the threads or the compression surfaces. The pipe may not be fully inserted.

Fitting won't connect to the male thread

Verify that the male thread is indeed 1/4" BSP and not a different thread standard (e.g., NPT). Ensure the thread is not damaged.

Pros and Cons

Pros

  • High-quality, durable brass material ensures longevity.
  • WRAS approval guarantees suitability for drinking water systems.
  • Kite Mark and BS standard compliance indicate superior quality.
  • Suitable for both water and gas applications.
  • Compression fitting allows for easy installation without specialized tools.

Cons

  • Specific size (6mm x 1/4" BSP) requires careful matching with existing pipework.
  • May be more expensive than non-branded or lower-standard fittings.
  • Requires adequate tightening torque to ensure a proper seal, without overtightening.

Setup, Compatibility & Care Instructions

Setup:

  1. Ensure the ends of the 6mm pipe and the 1/4" BSP male thread are clean and free from debris.
  2. Slide the compression nut onto the 6mm pipe.
  3. Place the compression olive (ferrule) onto the end of the 6mm pipe.
  4. Insert the pipe into the male 1/4" BSP threaded fitting.
  5. Slide the compression nut over the olive and thread it onto the fitting by hand.
  6. Using two wrenches, tighten the compression nut. Typically, tighten firmly by hand, then use a wrench to turn an additional 1/2 to 3/4 of a turn. Refer to specific installation guides for precise torque if available.

Compatibility:

  • This fitting is designed to connect 6mm OD (Outer Diameter) pipe to a 1/4" BSP (British Standard Pipe) male thread.
  • Ensure your pipe material is compatible with compression fittings (e.g., copper, certain plastics if rated).
  • Verify that the 1/4" BSP thread you are connecting to is indeed a male thread.

Care:

  • Primarily, care involves correct installation to prevent leaks.
  • Avoid overtightening, which can damage the pipe or fitting.
  • For long-term use, ensure the fitting is protected from excessive external corrosion. Periodic visual inspection is recommended.

Price History

DatePrice
Visit shop