Internal Verona White Clear Glass Primed Door - 1981 X 686 X 35mm (27") - XL Joinery

No, this door comes primed and requires a finishing paint coat applied by the customer before installation.

The dimensions are 1981mm in height, 686mm in width, and 35mm in thickness (equivalent to 27 inches in width).

Yes, the door is primed, allowing you to paint it with any suitable interior paint in your desired color.

No, this is an internal door and is not designed or treated for exterior conditions.

Yes, XL Joinery offers matching panelled and fire doors in the Verona range to maintain a consistent look throughout your property.

Use a standard glass cleaner with a soft, lint-free cloth. Avoid abrasive cleaners or excess moisture on the frame.

Ensure the primed surface is clean and dry. Apply thin, even coats of high-quality interior paint, allowing adequate drying time between each layer.

Check if the door has swollen due to humidity or if it's rubbing against the frame. Minor sticking can often be resolved by lightly planing the relevant edge of the door and re-priming/painting. Ensure hinges are correctly installed and aligned.

This may indicate inadequate surface preparation or insufficient paint coats. Ensure the primer was dry and the surface clean before painting. Apply additional thin coats of paint, allowing proper drying time. Avoid applying paint in humid or cold conditions.

The beading around the glass may have loosened. Gently tap the beading back into place or apply a small amount of clear sealant if necessary. Ensure the glass is properly bedded in its rebate before re-applying beading.