Trade Store Stop Bead - 3mm - 1.2M - Pack of 25
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This guide is for plasterers and builders using the Trade Store Galvanised Thin Coat Plaster Stop Bead. It provides a clean, reinforced finish to plaster edges, preventing cracking and protecting corners, though it requires manual cutting and fixing. This pack contains 25 lengths of 1.2m long, 3mm thick galvanised steel beads with perforated wings for excellent plaster keying and reinforcement.
All features
| Model Part Number | 154061 |
|---|---|
| Brand | Trade Store |
Extended Product Information
FAQs
What is the purpose of a stop bead?
A stop bead is used to provide a clean, reinforced edge and finish to plaster or render at junctions, openings, or soffits, protecting the edge from damage and preventing cracks.
How thick is the plaster this bead is designed for?
This specific bead is suitable for 3mm skim coat plastering.
How do I cut the stop bead?
The bead can be easily cut to size using tin snips or aviation cutters.
What material is the stop bead made from?
It is made from galvanised steel.
Can I use this bead on any wall surface?
Yes, it is suitable for plasterboard and aerated concrete blocks.
Does the bead come with fixings?
No, the bead does not come with fixings. You will need to use standard plasterboard nails or appropriate fixings.
What are the dimensions of each bead?
Each bead is 1200mm (1.2 meters) long and 3mm thick.
What certifications does this product have?
The product holds BS EN ISO 9001:2008 & ISO 14001:2004 certifications.
Troubleshooting
Plaster cracking along the bead edge
Ensure the bead is securely fixed and the perforated wings have adequate plaster coverage for a strong key. Verify that the bead is correctly positioned for the intended plaster thickness.
Difficulty cutting the bead
Use sharp tin snips or aviation cutters designed for metal. Ensure a clean, straight cut is made to avoid deforming the bead.
Bead not sitting flush against the surface
Check the substrate for unevenness. Ensure fixings are tight and the bead is correctly aligned before plastering.
Rust staining appearing on plaster
This is unlikely with galvanised steel. Ensure the bead has not been damaged, exposing the base metal, and that it is stored in a dry place.
Pros and Cons
Pros
- Provides a durable, reinforced finish for plaster edges.
- Perforated wings enhance plaster adhesion and prevent cracking.
- Galvanised steel is rust-resistant, preventing unsightly stains.
- Lightweight design and easy cutting simplify installation.
- Suitable for various substrates like plasterboard and concrete blocks.
Cons
- Requires manual cutting to desired lengths.
- Fixing requires separate nails or fixings.
- May not be suitable for very thick plaster applications.
- Not a self-adhesive product.
Setup, Compatibility & Care
Setup:
- Measure and cut the stop bead to the required length using tin snips or aviation cutters.
- Position the bead at the desired plaster edge, ensuring the perforated wings are flat against the surface.
- Secure the bead by driving standard plasterboard nails or suitable fixings through the pre-drilled holes into the substrate.
- Apply plaster, ensuring it finishes flush with the face of the bead.
Compatibility:
- Suitable for use with 3mm skim coat plastering.
- Can be applied to plasterboard and aerated concrete blocks.
- Ideal for junctions of walls, soffits, ceilings, and around openings.
Care:
- Store in a dry environment to maintain the galvanised finish.
- Handle with care to avoid unnecessary bending or damage.