HOMCOM Adjustable Squat Rack - Pull Up Bar, Barbell Bar

This versatile rack supports a wide range of exercises including squats, deadlifts, pull-ups, overhead presses, and can be used for bench presses when paired with a separate bench. Its design also allows for various bodyweight and resistance band exercises.

The barbell rack supports a maximum weight of 110kg, and the integrated pull-up bar has a maximum user weight capacity of 120kg. Always adhere to these limits for safety and product longevity.

The included barbell bar is designed to fit weight plates with either a 2.5cm (1 inch) or 5cm (2 inch) diameter hole.

Yes, assembly is required. The time taken can vary depending on your experience and if you have assistance, but typically it can be assembled within 1-2 hours. All necessary hardware and instructions are included.

The squat rack features a pin-based adjustment system. Simply pull out the locking pin, slide the barbell rack support to your desired height (there are 10 levels), and re-insert the pin securely into the corresponding hole. Ensure the pin is fully engaged before loading weight.

The overall dimensions of the HOMCOM A91-218 squat rack are approximately 190cm in length, 100cm in width, and 212cm in height. The pull-up bar is 200cm high and 107cm long.

This product comes with a 6-month guarantee, covering manufacturing defects from the date of purchase.

Ensure all assembly bolts and nuts are securely tightened. Check that the rack is placed on a flat, level surface. Uneven flooring can cause instability. If necessary, use shims under the rubber feet to level it.

Verify that your weight plates have either a 2.5cm or 5cm diameter hole. The included barbell is specifically designed for these sizes. If your plates have different hole sizes, you will need to acquire compatible plates or a different barbell.

Ensure that the locking pins are fully disengaged before attempting to adjust the height. Lift the barbell rack slightly to relieve pressure on the pin, then pull the pin out, adjust the height, and re-insert the pin securely into the desired hole. Lubrication may be needed for stiff pins.

Check and tighten all bolts connecting the pull-up bar section to the main uprights. Ensure that the frame itself is stable. Over time, bolts can loosen from movement and vibrations during use.

Carefully re-check all packaging and compare with the parts list in the assembly manual. If parts are genuinely missing, contact HOMCOM customer support with your model number (A91-218) and a description of the missing components.