Best current price£175.83from eBay
Shopping.co.uk recommended and popular offers
eBay£175.83Visit shop 1x Bottle Jack Extra Low - 20T - TY1005
Visit shop
B&Q£188.68Visit shop B&Q - Jack Bottle 20T Extra Low Qty 1
Visit shop2 offers from £175.83 - £188.68
View price history by clicking the chart icon.
This Mehr 20T Extra Low Bottle Jack is designed for automotive professionals and DIY enthusiasts needing to lift heavy loads with a compact, low-profile jack. Its key benefit is providing substantial lifting capacity (20 tonnes) within a minimal height range, ideal for vehicles with low ground clearance. A primary consideration is its specific weight and capacity, requiring careful placement and understanding of its operational limits.
| Brand | Mehr |
|---|
The minimum lifting height for the Mehr 20T Extra Low Bottle Jack is 165 mm.
The maximum lifting height is 285 mm.
This bottle jack has a lifting capacity of 20 tonnes.
The approximate weight of the Mehr 20T Extra Low Bottle Jack is 9.4 kg.
Yes, with its 20-tonne capacity, it is suitable for lifting trucks, buses, and other heavy commercial vehicles.
It is recommended to use standard hydraulic jack oil. Consult the manufacturer's specific guidelines if available.
Yes, its 'Extra Low' design with a minimum height of 165 mm makes it particularly suitable for vehicles with limited ground clearance.
Check that the release valve is fully closed. Ensure there is sufficient hydraulic fluid. Inspect for any air in the system or fluid leaks.
This may indicate a fluid leak or a faulty release valve. Inspect the jack carefully for any signs of leakage and ensure the valve is sealing properly.
Ensure the jack is on a level surface and the load is centered. Check the hydraulic fluid level and quality. If the issue persists, there may be an internal obstruction.
Setup: Ensure the bottle jack is placed on a hard, level, and stable surface. Position the jack saddle directly under the vehicle's designated lift point. Operate the handle by pumping it up and down to raise the load. Use the handle to lower the load by turning the release valve counter-clockwise slowly. Always ensure the jack is perpendicular to the ground during operation.
Compatibility: This jack is compatible with any vehicle or equipment within its 20-tonne weight capacity and requiring lifting from a minimum height of 165 mm up to a maximum of 285 mm. It is suitable for use with trucks, buses, heavy machinery, and other industrial applications.
Care: Regularly inspect the jack for leaks, damage, or wear. Keep the hydraulic ram clean and lightly oiled to prevent rust. Store the jack in a dry environment, typically in an upright position. Periodically check the hydraulic fluid level and top up with appropriate hydraulic jack oil if necessary, following manufacturer recommendations.
