Lindy Power Cable - 1 m IEC C14 to 2 x IEC C13

This cable is rated for a maximum of 10A and 250V.

No, this cable is intended for use in dry areas only and should not be exposed to moisture.

You can connect any devices that use a standard IEC C13 power cord, such as PCs, monitors, printers, audio equipment, and projectors, provided their combined power draw does not exceed 10A.

The Lindy IEC splitter cable comes with a 10-year warranty.

Yes, the brass used in the connectors contains less than 0.1% lead and is SVHC-free.

The IEC C14 is the male connector that typically plugs into a power source or an appliance, while the IEC C13 is the female connector found on most standard power cords for devices like computers and monitors.

Verify that the IEC C14 plug is securely inserted into the power source. Check that the IEC C13 plugs are firmly seated in the splitter cable. Ensure the power source itself is active and the connected devices are functioning.

Confirm that the total power draw of the connected devices does not exceed the 10A/250V limit. Check for any damage to the cable or connectors and replace if necessary.

Immediately disconnect the cable and connected devices. This may indicate an overload. Ensure the total amperage draw is within the specified limits. Inspect the cable for damage.