Best current price£15.92from B&Q
Shopping.co.uk recommended and popular offers
B&Q£15.92Visit shop B&Q - Tiletastic Black Dark Square Mosaic Stone Effect Self-Adhesive Vinyl Floor Tiles 30.5Cm X 30.5Cm X 0.9Cm (10 Tiles)10 Sqft
Visit shop2 offers from £15.92 - £16.60
View price history by clicking the chart icon.
The Tiletastic Black Dark Square Mosaic Stone Effect Self-Adhesive Vinyl Floor Tiles are designed for homeowners seeking a stylish and budget-friendly flooring update with straightforward DIY installation. Ideal for small to medium areas or accent features, these tiles offer the aesthetic of premium stone without the cost or complexity of traditional tiling. A key benefit is their easy peel-and-stick application, requiring no grout or special adhesives. However, potential users should note that surface preparation is critical for optimal adhesion.
| Model Part Number | Tiletastic |
|---|---|
| Brand | HSD |
One pack contains 10 tiles and covers approximately 10 square feet.
While the tiles are water-resistant, they are not recommended for continuous immersion in water or areas with heavy direct shower spray. They are best suited for general bathroom moisture, not direct shower stalls.
No, the peel-and-stick nature means no special tools are required for basic installation. A sharp utility knife and a measuring tape are useful for cutting tiles to fit edges or around obstacles.
Yes, provided the existing tile surface is smooth, level, and the grout lines are minimal. If grout lines are deep, they may need to be filled first to ensure a smooth surface for adhesion.
Clean with a damp cloth and mild soap. Avoid abrasive cleaners or excessive water, which can damage the surface or adhesive.
Each Tiletastic tile has a thickness of 0.9cm.
They are suitable for moderate foot traffic in areas like kitchens and bathrooms. For very high-traffic areas, consider their long-term durability.
Ensure the subfloor is perfectly clean, dry, and smooth. Reheat the adhesive gently with a hairdryer on a low setting and press firmly. Consider using a floor roller for even pressure. If the subfloor is unsuitable, re-evaluate the installation surface.
This usually indicates improper surface preparation or misalignment during installation. Ensure tiles are laid flat and adjacent edges are pressed together firmly. For existing gaps, consider using a suitable color-matched caulk or sealant designed for vinyl flooring.
This can be caused by moisture trapped underneath or insufficient initial pressure. Ensure proper ventilation during and after installation. Gently lift the affected tile, clean the area, and re-adhere with firm pressure, possibly using a floor roller.
Use a sharp utility knife and a metal ruler for straight cuts. For more intricate shapes, a specialized vinyl flooring cutter or a sharp craft knife can be used. Score the tile multiple times for a cleaner cut.
Setup: Ensure the subfloor is clean, dry, smooth, and free of dust, grease, and old adhesive. For best results, use a primer if recommended for your specific subfloor type. Peel the backing from one tile at a time and carefully align it with the previous tile before pressing down firmly. Start from the center of the room or the most visible area.
Compatibility: These tiles adhere best to smooth, non-porous surfaces such as sealed concrete, linoleum, existing vinyl flooring, or smooth tile. Avoid applying to carpet, textured surfaces, or freshly painted walls. Ensure the temperature of the room is between 18-24°C (65-75°F) during installation for optimal adhesive performance.
Care: Clean the tiles regularly with a damp cloth and mild, non-abrasive detergent. Avoid using harsh chemicals, abrasive cleaners, or excessive water, as this can damage the surface or weaken the adhesive. Mop up spills immediately.
