Best current price£34.83from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£34.83Visit shop Milliput 6 Colour Epoxy Putty Pack 113G Each - Standard, Silver Grey, White, Terracotta, Blue & Black Repair Filler Set 5060661601102
Visit shop
B&Q£35.58Visit shop B&Q - 6 Colour Epoxy Putty Pack 113G EachStandardSilver GreyWhiteTerracottaBlue & Black Repair Filler Set
Visit shop2 offers from £34.83 - £35.58
View price history by clicking the chart icon.
The Milliput 6 Colour Epoxy Putty Pack is for DIY enthusiasts, modelers, and professionals who need versatile repair and creative solutions across various materials. Its key benefit is offering six distinct colors of a dependable, two-part epoxy putty that cures to a hard, workable finish. A potential caveat is that precise color matching may require mixing the putties.
| Colour | Grey |
|---|---|
| Brand | Milliput |
Working time is typically 30 minutes to an hour. It becomes hard in a few hours, and full cure can take 12-24 hours, depending on temperature and the amount mixed.
Yes, mixing the different colors allows you to achieve a wider spectrum of shades for custom matching.
Yes, once fully cured, Milliput forms a very hard and strong bond, making it suitable for many structural repair applications on rigid materials.
Yes, Milliput is waterproof once fully cured and can be used in marine or wet environments.
Store unmixed Milliput in its original packaging in a cool, dry place. Properly stored, it has a long shelf life.
Yes, once cured, Milliput can be sanded smooth and painted with most types of paint, including acrylics, enamels, and primers.
Each putty pack in the 6-colour set weighs 113g.
Ensure equal parts of both components were mixed thoroughly and continuously until a uniform color was achieved. Check if the putty is old or has been stored improperly, affecting its reactivity.
Work in a cooler environment. Mix only small batches that can be used within the working time. Ensure components are stored at room temperature and not exposed to excessive heat.
Clean the surface thoroughly to remove all dust, grease, oil, or paint. Lightly abrading the surface with sandpaper can also improve adhesion.
Allow the putty to cure fully. If it's still difficult, you may be using sandpaper that is too coarse. Try wet-sanding with progressively finer grits.
Setup: To use Milliput, cut equal lengths of the two different colored sticks (Part A and Part B) and knead them together thoroughly until a uniform color is achieved. The putty is then ready to be applied. Work within the specified working time, typically around 30 minutes to an hour, depending on temperature.
Compatibility: Milliput adheres well to most common surfaces including metal, wood, glass, ceramic, concrete, and many plastics. Ensure surfaces are clean, dry, and free from grease or loose material for best adhesion. It is not recommended for use on flexible materials.
Care: Once cured, Milliput can be treated like the material it's bonded to. It can be sanded, drilled, tapped, carved, and painted. For cleaning tools and work surfaces, use water and soap before the putty cures. After curing, mechanical methods like sanding are required.
