Best current price£9.08from B&Q
Shopping.co.uk recommended and popular offers
B&Q£9.08Visit shop B&Q - Premium Confirmat Cabinet & Furniture Assembly Screws6.4 X 50mmPack Of 10
Visit shop1 offer from £9.08
View price history by clicking the chart icon.
The SS8 Confirmat Cabinet and Furniture Assembly Screws (6.4 x 50mm) are essential for DIY enthusiasts and professional cabinetmakers looking to create rigid, long-lasting joints in engineered woods like MDF, chipboard, and particleboard. These specialized fasteners offer industry-leading pull-out resistance and stability, though they require a specific multi-step drilling process compared to standard wood screws.
| Model Part Number | 6.4 X 50mm |
|---|---|
| Brand | Diyuk |
Yes, a three-step Confirmat drill bit is required to properly seat the shank and head.
They are designed for engineered woods like MDF and particleboard; they perform poorly in hardwoods.
It acts as a steel dowel, which provides sheer strength and prevents the joint from racking.
Yes, they are designed to be removed and re-installed without losing significant holding power.
Standard plastic Confirmat screw caps are available in various colors to match common cabinet laminates.
You likely did not use the correct multi-stage Confirmat bit. Ensure the shank hole is properly cleared of debris.
Check that the two pieces of wood are flush before driving the screw, and ensure the unthreaded shoulder is seated correctly within both panels.
Reduce torque settings on your drill and ensure the countersink depth is correctly set to prevent excessive pressure on the material surface.
To install 6.4 x 50mm Confirmat screws, you must use a dedicated Confirmat drill bit. This bit drills a three-stage hole: a pilot for the tip, a wider section for the shank, and a countersink for the head.
For care, these screws are permanent once tightened; however, they can be backed out using the same hex bit for maintenance or unit relocation. Always store in a dry environment to prevent surface corrosion.
