SKF Ball Bearing - 6005EE
Best current price£10.63from eBay
Best offers
Shopping.co.uk recommended and popular offers
eBay£10.63Visit shop Fits NTN-SNR 6005EE 25x47x12 ball bearing & 6005.EE
Visit shopeBay£10.63Visit shop All Offers
3 offers from £10.63 - £11.05
View price history by clicking the chart icon.
✅Fits NTN-SNR 6005EE 25x47x12 ball bearing & 6005.EE ⭐UK Seller⭐Free delivery in 1–3 days£10.83Visit shop →
Roller Bearing 6005 2RS SNR Fits KTM SX 200 2003-2004Free delivery in 1–3 days£11.05Visit shop →
Product Information
Full details
The SKF 6005EE ball bearing is designed for mechanics and motorcycle enthusiasts who need a reliable, high-performance component for two-wheeled vehicle maintenance. Its precision engineering provides stability and resistance during operation, though users should note that the silicone shields are intended for dust and light contaminant protection rather than full submersion in harsh chemical environments.
All features
| Model Part Number | 6005EE |
|---|---|
| Brand | SKF |
Extended Product Information
FAQs
What are the dimensions of the SKF 6005EE?
The bearing has an internal diameter of 25mm, an external diameter of 47mm, and a width of 12mm.
Can this bearing be used in high-speed applications?
The 6005EE is intended for standard motorcycle applications; please consult your motorcycle service manual for specific RPM compatibility.
What do the 'EE' letters indicate?
The 'EE' suffix indicates that the bearing features dual silicone shields for added protection against dust and dirt.
Does this bearing come pre-lubricated?
Yes, standard SKF ball bearings of this type are typically pre-lubricated for the life of the bearing under normal conditions.
Is this suitable for all motorcycle brands?
It is compatible with any application requiring a 25x47x12mm bearing, but you should always verify the specific size requirement in your vehicle's technical documentation.
Should I add extra grease during installation?
Generally, no. Adding external grease can interfere with the existing seals and trap contaminants.
Troubleshooting
Bearing rotation feels gritty or stiff after installation
Verify that the bearing was not pressed into the housing at an angle or that the surrounding housing is not warped.
Excessive heat generation during operation
Check for correct alignment and ensure the bearing is not being subjected to excessive axial loading beyond its rated capacity.
Pros and Cons
Pros
- High-quality manufacturing standards from a trusted brand
- Dual silicone shields prevent dust and contaminant ingress
- Precise dimensions ensure seamless installation
- Enhanced durability for motorcycle-specific applications
Cons
- Shielding is not designed for underwater or deep-water submersion
- Requires proper alignment during press-fit installation
- Not suitable for high-heat environments exceeding standard bearing specifications
Setup, Compatibility & Care
To install the 6005EE, ensure the housing surface is clean and free of burrs or metal debris. Use an appropriate bearing press tool to apply even, distributed pressure on the outer ring; avoid hammering directly on the inner ring or the shields, as this can cause deformation. For maintenance, monitor for unusual noises or excessive heat during operation, which may indicate a need for replacement. Ensure the bearing is not forced into a housing that is undersized, as this will compromise the internal clearances and lead to premature failure.