Best current price£46.85from eBay
Shopping.co.uk recommended and popular offers
eBay£46.85Visit shop 4 X U-Pol HIGH5 1K Ready For Use GREY High Build Primer Paint 450ml UPOL
Visit shop3 offers from £46.85 - £50.12
View price history by clicking the chart icon.
The U-Pol HIGH5 1K Ready For Use High Build Primer is designed for professional automotive technicians and DIY enthusiasts who need a fast, reliable solution for spot and smart repairs. This high-performance primer delivers the build quality typically reserved for professional spray equipment in a convenient aerosol format, allowing for quick surface preparation before painting. While it offers exceptional coverage and ease of use, users should ensure they are working in a well-ventilated area due to the aerosol nature of the product.
| Colour | Grey |
|---|---|
| Model Part Number | HIGHG/AL |
| Brand | U-Pol |
| Container Volume | 450ml |
No, this is a 1K 'ready-for-use' product, meaning it is a single-component system that does not require additional hardener.
While it is a high-quality primer, it is designed for spot and smart repairs and is not recommended for full vehicle resprays due to the aerosol delivery method.
Drying times vary based on temperature and humidity, but it is typically ready to sand once it has fully cured to a hard finish.
It is compatible with most standard automotive topcoats, but always conduct a test patch to ensure compatibility with your specific paint system.
The neutral grey shade helps improve the opacity of the final paint layer and provides a standard background for checking the surface for defects during sanding.
Clear the nozzle by turning the can upside down and spraying for several seconds; if blockage persists, clean the tip with a solvent-based cleaner.
Apply thinner, lighter coats and ensure you are keeping the can at the recommended distance (usually 15-20cm) from the surface.
Ensure the surface was adequately sanded and thoroughly degreased prior to applying the primer.
Before use, shake the aerosol can vigorously for at least two minutes to ensure the pigment is thoroughly mixed. Application should occur in an ambient temperature between 15°C and 25°C for optimal flow and drying. Always clear the nozzle after each use by holding the can upside down and spraying until the propellant runs clear to prevent clogging. Store the product in a cool, dry place away from direct sunlight and heat sources to maintain shelf life. Compatibility is generally high with most automotive topcoats, but performing a small test spray on a hidden area or sample panel is always recommended before full application.
