Daler-Rowney FW Acrylic Ink Pouring Medium - 750ml

Its primary purpose is to enable artists to create smooth, even, and consistent pours with acrylic inks, ensuring a uniform color film upon drying.

This medium is specifically designed for use with Daler-Rowney's FW Ink, System3 Ink, and Aquafine Ink.

While it might be possible, it is not recommended as the formulation is optimized for Daler-Rowney inks. Mixing with other brands may lead to unpredictable results or drying issues.

It is suitable for use on canvas, wood, and other art surfaces that have been properly primed for acrylic mediums.

Use the recommended 1:1 mixing ratio of ink to medium and ensure your surface is clean, dry, and properly primed. Gentle mixing and a stable drying environment are also key.

Each bottle contains 750ml of FW Acrylic Ink Pouring Medium.

The medium is designed to dry with a smooth, even-colored film, meaning it should not significantly alter the intended color of the ink when mixed in the correct ratio. It primarily affects the flow and drying characteristics.

Ensure you are using the correct 1:1 mixing ratio of ink to medium. If the mixture is still not ideal, slight adjustments may be necessary based on ink viscosity, but always start with the recommended ratio. Avoid adding water, as this can affect drying properties.

This can occur if the surface was not adequately primed, if the mixture contained too much ink relative to the medium, or if the environment is too humid or has extreme temperature fluctuations. Ensure proper surface preparation and a consistent environment during drying.

Avoid vigorous mixing. Gently stir the ink and medium together. If bubbles are present, you can try lightly torching the surface (use with extreme caution and only on suitable surfaces) or allowing the mixture to sit for a few minutes before pouring to let some bubbles dissipate.