Shopping.co.uk

Festo Round Cylinder 4mm Bore 10mm Stroke Single Acting

Festo Round Cylinder 4mm Bore 10mm Stroke Single Acting

This single-acting, pushing micro cylinder features a 4 mm piston diameter and 10 mm stroke. It de...

Best current price£27.70from Tameson UK

Best offers

Shopping.co.uk recommended and popular offers

Lowest priceMost popular
Tameson UK£27.70Visit shop

Festo Light Compact Cylinder 6Mm Bore 5Mm Stroke Single Acting - 4984929

Visit shop

All Offers

10 offers from £27.70 - £36.06

View price history by clicking the chart icon.

Tameson UKFesto Light Compact Cylinder 6Mm Bore 5Mm Stroke Single Acting - 4984929
Free delivery in 1–3 days
£27.70
Visit shop

Used Offers

5 offers from £38.08 - £73.33

View price history by clicking the chart icon.

eBayFesto Flat Cylinder 164991 EZH-2.5/9-10-B
£15.60 delivery
£38.08
Visit shop

Product Information

Full details

This Festo round cylinder is designed for automation specialists and engineers working with compact machinery. Its key benefit is providing precise linear motion in space-constrained applications. A caveat is its lack of integrated cushioning, requiring careful consideration in high-speed or load-sensitive operations. The cylinder features a 4mm bore, 10mm stroke, and single-acting operation, utilizing a barbed fitting for straightforward pneumatic connections.

All features

Model Part NumberEG-4-10-PK-2
BrandFesto

Extended Product Information

FAQs

What is the theoretical force at 6 bar?

The theoretical advancing force at 6 bar is 4.9 N.

Does this cylinder have cushioning?

No, this specific model does not feature integrated cushioning.

What type of tubing is compatible?

It is designed for use with standard plastic tubing that has a 2mm inner diameter, connecting via the integrated barbed fitting.

Is this cylinder double-acting?

No, this is a single-acting cylinder, meaning it uses air pressure to extend and a spring to retract.

Can I use this for heavy lifting?

With a theoretical force of 4.9 N at 6 bar and no cushioning, it is best suited for light-duty tasks and precise positioning rather than heavy lifting.

What is the operating pressure range?

The cylinder is designed to operate between 1 and 10 bar, with optimal performance often found around 6 bar.

How is the cylinder controlled?

It is controlled by a pneumatic signal to a directional control valve that directs air to the cylinder port for extension. Spring force retracts the cylinder when the air signal is removed.

Troubleshooting

Cylinder not extending fully

Check air supply pressure. Ensure there are no obstructions preventing full extension. Verify that the control signal to the valve is present and correct.

Cylinder not retracting

Confirm that the air supply has been removed from the port. Ensure the spring return is not obstructed or weakened. Check for any external forces holding the rod in place.

Slow or jerky movement

Check for air leaks in the system. Ensure the air supply is clean and free of moisture or debris. Verify the operating pressure is within the recommended range.

Air leaks from rod seal

Inspect the rod seal for damage. If damage is present, the cylinder may require replacement. Ensure operating conditions are within specification.

Pros and Cons

Pros

  • Extremely compact for tight integration.
  • Suitable for low-force actuation tasks.
  • Simple pneumatic connection via barbed fitting.
  • Reliable performance in repetitive tasks.
  • Cost-effective solution for basic automation.

Cons

  • No built-in cushioning, which can lead to impact.
  • Single-acting design limits control options.
  • Requires external force (spring) for retraction.
  • Limited force output compared to larger cylinders.
  • Not suitable for heavy loads or high-impact applications without additional damping.

Setup, Compatibility & Care

Setup:

  1. Ensure the air supply is clean and dry. A pressure regulator set to the desired operating pressure (e.g., 6 bar) is recommended.
  2. Connect pneumatic tubing to the barbed fitting. For standard plastic tubing with a 4mm outer diameter and 2mm inner diameter, push the tubing firmly onto the fitting.
  3. Mount the cylinder securely to your application using appropriate brackets or by integrating it into your machine structure.
  4. Connect the pneumatic line to an appropriate control valve.

Compatibility:

  • Pneumatic Tubing: Compatible with standard plastic tubing having a 2mm inner diameter.
  • Air Pressure: Operates optimally between 1 to 10 bar, with 6 bar recommended for specified force.
  • Environment: Designed for general industrial environments. Avoid excessively dusty or corrosive atmospheres.

Care:

  • Regularly inspect the pneumatic tubing and connections for leaks or damage.
  • Ensure the air supply is filtered to prevent contamination of the internal cylinder mechanism.
  • In dusty environments, periodically clean the exterior of the cylinder. No internal lubrication is typically required for this type of cylinder.

Price History

DatePrice
Visit shop