Best current price£11.91from Tameson UK
Shopping.co.uk recommended and popular offers
Tameson UK£11.91Visit shop Schneider Electric Harmony Auxiliary Contact Block - Zbe1026
Visit shop1 offer from £11.91
View price history by clicking the chart icon.
The Schneider Electric Harmony XB4 ZBE1026 auxiliary contact block is designed for industrial control panels, offering a reliable 1 Normally Closed (NC) contact for integrating additional control or signaling functions. It provides essential signaling capabilities in a compact, front-mounting unit, ideal for augmenting existing 22mm push button or selector switch assemblies. A key benefit is its gold-flashed contacts, which ensure superior performance and longevity, even in challenging environments. However, users should note its fixed 1NC configuration, meaning it cannot be rewired for Normally Open (NO) functionality.
| Series | Harmony |
|---|---|
| Model Part Number | ZBE1026 |
| Brand | Schneider Electric |
'1 NC' signifies that the contact block has one Normally Closed contact. This means the circuit is complete (closed) when the actuator (like a pushbutton) is in its normal, unactuated state, and the circuit breaks (opens) when the actuator is pressed or activated.
No, the ZBE1026 is a fixed 1 NC configuration and cannot be rewired or converted to function as a Normally Open contact.
Gold-flashed contacts provide a very thin layer of gold over the base metal. This significantly improves conductivity and offers excellent resistance to oxidation and corrosion, ensuring a more reliable electrical connection, especially in demanding or low-voltage/low-current applications.
IP20 indicates that the device is protected against solid objects larger than 12.5mm (like a finger) but offers no protection against water. It is intended for use in dry, indoor environments.
The rated operating current (Ie) at AC-15 is 2.3A. It is important not to exceed this rating for reliable operation and to prevent damage.
Use a dry or slightly damp soft cloth to wipe the exterior. Avoid using solvents or abrasive cleaners. Ensure the unit is disconnected from power before cleaning.
This contact block is designed to mount on the rear of Schneider Electric XB Series 22mm diameter control station heads, such as pushbuttons, selector switches, and pilot lights.
Verify correct wiring to the NC terminal. Ensure the connected head is functioning correctly and the contact block is properly seated. Check if the circuit is experiencing a load exceeding the 2.3A AC-15 rating.
Ensure you are using a compatible Schneider Electric XB Series 22mm head. Check for any obstructions or damage on the mounting interface of both the head and the contact block.
Check that all wire connections at the screw terminals are tight and secure. Inspect the gold-flashed contacts for any contamination and gently clean with a suitable electronic contact cleaner if necessary.
Setup:
Compatibility:
Care:
