Best current price£12.38from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£12.38Visit shop Lindy 41755 Usb Cable 5 M Usb A Usb B Male Transparent 4002888417556
Visit shop1 offer from £12.38
View price history by clicking the chart icon.
This Lindy 5m USB 2.0 cable is designed for users needing reliable data transfer between devices with USB Type-A and Type-B ports. Its key benefit is providing a stable connection with speeds up to 480Mbit/sec over a 5-meter length. A potential consideration is its USB 2.0 specification, which may not be suitable for the highest-speed USB 3.0 or newer requirements.
| Model Part Number | 41755 |
|---|---|
| Brand | Lindy |
This cable complies with the USB 2.0 specification and supports a maximum data transfer rate of 480 Mbit/sec.
Yes, the cable is backward compatible with USB 3.0 ports, but the data transfer speed will be limited to USB 2.0 speeds (480 Mbit/sec).
USB Type-B connectors are commonly found on printers, scanners, older external hard drive enclosures, and some audio interfaces.
The 5-meter length is ideal for extending connections where devices are not immediately adjacent to the computer. For very short connections, it may be unnecessarily long. For extremely long runs beyond 5 meters, signal degradation might occur, and active USB extension solutions may be needed.
AWG stands for American Wire Gauge. A lower AWG number indicates a thicker wire. This cable uses 28AWG for data and 26AWG for power, with the thicker power wire helping to ensure stable power delivery over the 5-meter length.
This cable is backed by a 10-year warranty from Lindy.
You can wipe the transparent casing with a soft, slightly damp cloth. Ensure no moisture enters the USB connectors. Avoid using harsh chemicals or abrasive cleaners.
Ensure both USB connectors are fully inserted. Try a different USB port on your host device. Verify that the peripheral device is powered on and functioning correctly. Test with a shorter, known-good cable if possible to rule out cable failure. For longer runs, ensure the host device's USB port can supply adequate power.
Confirm that both the host device and peripheral device support USB 2.0 speeds or higher. Check that the cable is not being used with a USB 1.1 port. Ensure no other high-bandwidth USB devices are competing for resources on the same USB controller. Clean the connectors.
Visually inspect the cable for any cuts, kinks, or damaged connectors. If damage is found, discontinue use and replace the cable. Contact Lindy support if the cable is within the warranty period.
Setup: Simply plug the USB Type-A connector into a compatible USB port on your host device (e.g., computer) and the USB Type-B connector into the corresponding port on your peripheral device (e.g., printer). Ensure both ends are securely seated.
Compatibility: This cable is compatible with any device featuring a USB Type-A port and another device featuring a USB Type-B port, operating under the USB 2.0 standard. It is backward compatible with USB 1.1 devices but will be limited to USB 1.1 speeds.
Care: To maintain the cable's condition, avoid sharp bends, excessive pulling, or exposing it to extreme temperatures or moisture. Clean the connectors gently with a dry, lint-free cloth if they appear dusty. The transparent casing can be wiped with a slightly damp cloth if necessary, ensuring no liquid enters the connectors.
