Scan P3 Particle Filter Cartridge Adaptor - Pack of 2

P3 indicates a high level of efficiency in filtering out very fine particulate matter, including dust, mists, and fumes.

No, this adaptor is specifically designed for use with Scan brand respirator bodies, gas filters, and particle filters to ensure compatibility and a secure seal.

You will need a compatible Scan respirator half mask, the SCAPPEFCA1 gas filter cartridge, this P3 Particle Filter Cartridge Adaptor, and a Scan P3 particle filter. Attach the gas filter to the mask, then the adaptor to the gas filter, and finally the P3 particle filter to the adaptor.

No, the adaptor is a component that allows you to combine different types of filters (gas and particle) onto a compatible respirator. It does not provide filtration on its own.

Filter replacement intervals depend on the specific contaminants, their concentration, and the duration of use. Always follow the manufacturer's guidelines for your specific gas and particle filters and replace them when breathing resistance increases or they are visually soiled.

The integrated rubber gasket is crucial for creating an airtight seal between the adaptor, the gas filter, and the particle filter. This prevents contaminated air from bypassing the filters, ensuring maximum protection.

Ensure you are using a compatible Scan gas filter cartridge and particle filter. Check that the bayonet fittings on all components are clean and undamaged. Apply firm, even pressure during attachment.

Inspect the rubber gasket on the adaptor for damage, debris, or improper seating. Ensure the gasket is clean and making full contact. Re-seat or replace the adaptor if the gasket is compromised.

Gently twist the filter while pulling away from the adaptor. Ensure no debris is obstructing the bayonet mechanism. Avoid forcing the removal.