Canon RF 24-105mm F4-7.1 IS STM Lens - Canon

Yes, absolutely. The Canon RF 24-105mm f/4-7.1 IS STM features a quiet STM motor for smooth, silent autofocus transitions, which is ideal for video. Additionally, its 5-stop optical image stabilization helps to keep handheld footage steady and professional-looking.

This lens is designed for Canon's RF mount and is compatible with all Canon EOS R series full-frame mirrorless cameras (e.g., EOS R, EOS RP, EOS R5, EOS R6). It can also be used on APS-C RF cameras like the EOS R7 or R10, where it will have a crop factor applied.

Centre Focus Macro mode allows you to achieve close-up shots with up to 0.5x magnification when the lens is at its 24mm wide-angle setting. Unlike traditional macro lenses that achieve macro at various focal points, this mode specifically utilizes the center of the frame for its closest focusing ability.

While it has 5-stop image stabilization, its variable aperture (f/4 at 24mm to f/7.1 at 105mm) means it's not ideal for very low-light situations. You might need to use a higher ISO setting or slower shutter speeds (relying on IS or a tripod) compared to lenses with a constant, wider aperture (e.g., f/2.8).

For dust, use a rocket blower or soft lens brush. For smudges or fingerprints, gently wipe the lens elements with a clean, optical-grade microfibre cloth. For stubborn marks, use a small amount of lens cleaning solution applied to the cloth, never directly to the lens.

The control ring is a customizable ring on the lens barrel that can be assigned via your camera's menu to quickly adjust various shooting parameters such as aperture, shutter speed, ISO, or exposure compensation. It offers a tactile and intuitive way to change settings without taking your eye from the viewfinder.

Check if Image Stabilizer (IS) is turned on for handheld shooting. Ensure your camera's autofocus mode is correctly selected and the AF/MF switch on the lens is set to 'AF'. For low light, use a higher ISO or wider aperture if possible, or increase shutter speed. If using Centre Focus Macro, ensure you are within the correct focusing distance.

Confirm the AF/MF switch on the lens is set to 'AF'. Check your camera's autofocus settings. Ensure there's sufficient light on your subject for the AF system to acquire focus. Clean the lens and camera contacts if autofocus is inconsistent.

A slight whirring noise from the STM motor during autofocus is normal. However, if it's a loud clicking or grinding, gently remove and reattach the lens to the camera. If the issue persists, contact Canon support. Avoid forcing any parts.

First, inspect the front and rear lens elements for dust or smudges. Use a blower brush to remove loose dust, then gently clean with a lens-specific microfibre cloth. If dust persists, check your camera's sensor, as sensor dust can also appear in images.

Access your camera's menu and navigate to the 'Customize dials/buttons' or 'Control ring settings' to ensure the control ring is assigned to the desired function (e.g., aperture, ISO, shutter speed, exposure compensation). Make sure it's not set to 'Off' or an unintended function.