Bahco 317-40 Plastic Wheel Reamer

The Bahco 317-40 is designed specifically for plastic pipes and tubes.

The reamer is suitable for pipes and tubes with a diameter ranging from 3mm to 40mm.

Insert the tube end into the reamer, apply light pressure, and rotate the tool to remove burrs.

Clean the reamer after each use by removing plastic shavings. You can use a brush or cloth.

Store the reamer in a dry place to prevent rust and damage.

Check the blade for wear or damage. Ensure you are using the correct technique and applying appropriate pressure. Consider replacing if damaged.

No, this reamer is designed for plastic pipes and tubes only and is not suitable for metal.

Make sure the pipe is properly inserted, check for obstructions, and ensure you're not applying too much pressure. Consider applying some lubricant.

Check the blade for wear or damage and ensure you are using the correct technique. Apply firm, even pressure and rotate the tool steadily. Replace the reamer if damaged.

Ensure the pipe or tube is properly inserted into the reamer. Check for any obstructions, and ensure you're not applying too much pressure. Apply some lubricant if needed.