Setup, Compatibility & Care
Setup:
- Disconnect the existing trap and clean the sink outlet threads thoroughly.
- Apply plumber's tape to the threaded connection if necessary to ensure a watertight seal.
- Attach the trap body to the sink, hand-tightening the coupling nuts.
- Connect the flexible portion to the 40mm wall pipe, ensuring it is pushed in far enough to seat the internal gasket.
Compatibility:
This trap is compatible with standard 6/4" (approx. 40mm) kitchen sink connections. Ensure your wall drainage is also standard 40mm to prevent leaks.
Care:
Periodically flush the system with hot water and mild detergent to clear out grease build-up. Avoid using harsh chemical drain cleaners, as they may compromise the integrity of the flexible plastic component over time.