Plasson Pushfit End Plug - 25mm
Best current price£15.14from The Range
Best offers
Shopping.co.uk recommended and popular offers
The Range£15.14Visit shop Plasson Pushfit End Plug - 25Mm 1012 (Pp1012u0025) - Grey
Visit shopThe Range£15.14Visit shop All Offers
4 offers from £15.14 - £18.31
View price history by clicking the chart icon.
The RangePlasson Pushfit End Plug - 25Mm 1012 (Pp1012u0025) - Grey
Free delivery in 1–3 days
£15.14
Visit shop
OnBuy.comPlasson Pushfit End Plug - 25Mm 1012 (Pp1012u0025) 7296173364022
Free delivery in 1–3 days
£16.70
Visit shop
Plass-ONE 25mm MDPE Push Fit End Plug - 1012 - FREE Next-Day DeliveryFree delivery in 1–3 days£18.31Visit shop →
Product Information
Full details
The Plasson Pushfit End Plug - 25mm (PP1012U0025) is designed for professionals and DIYers needing to securely seal off the end of a 25mm water pipe. Its key benefit is the tool-free, push-fit installation, allowing for quick and easy application. A key consideration is that an MDPE pipe liner is required and must be purchased separately for a complete seal. This fitting is ideal for infrastructure projects and general plumbing, offering a reliable solution for water and fluid conveyance.
All features
| Model Part Number | 1012U0025 |
|---|---|
| Brand | Plasson |
Extended Product Information
FAQs
Do I need any special tools to install this end plug?
No, the Plasson Pushfit End Plug is designed for tool-free installation. Simply push the pipe into the fitting until it stops.
Is an MDPE pipe liner always required?
Yes, an MDPE pipe liner is mandatory when connecting to MDPE pipes to ensure a secure and leak-proof seal. It is not required for other pipe materials like copper or PEX, but check compatibility recommendations.
What is the maximum pressure this fitting can handle?
The fitting is PN16 rated, meaning it can withstand pressures up to 16 BAR (approximately 232 PSI).
Can this fitting be used for hot water?
While WRAS approved for potable water, always check the specific temperature limitations for the material of the connected pipe and the fitting itself. Consult the manufacturer's detailed specifications for temperature ranges.
How do I remove the fitting if needed?
Plasson Pushfit fittings typically have a release collar. Push the collar inwards towards the fitting body while pulling the pipe outwards to disconnect.
What is WRAS approval?
WRAS approval signifies that the product meets the Water Supply (Water Fittings) Regulations and Scottish Byelaws, ensuring it is safe for use with public water supplies.
What types of pipes are compatible with this fitting?
This 25mm fitting is compatible with PE, PB, PEX, and Copper pipes. For MDPE pipes, a pipe liner must be used.
Troubleshooting
Leak at the connection point
Ensure the pipe is fully inserted to the stop. Check that the pipe end is clean, round, and free from damage. Verify that an MDPE liner is correctly installed in MDPE pipes. Re-seat the pipe.
Difficulty inserting the pipe
Ensure the pipe end is not deformed or oval. Remove any burrs or debris from the pipe end. Lightly lubricate the pipe end with water or a silicone-based lubricant (avoid petroleum-based lubricants).
Fitting does not seal properly
Confirm that the correct size fitting is being used for the 25mm pipe. Ensure the pipe is pushed in completely until it stops. If issues persist, the fitting or pipe may be damaged and require replacement.
Pros and Cons
Pros
- Extremely easy and fast to install, requiring no special tools.
- WRAS approval guarantees suitability for drinking water systems.
- High pressure rating (PN16) suitable for demanding applications.
- Works with a variety of common pipe materials.
- Provides a reliable and secure pipe end seal.
Cons
- Requires a separate MDPE pipe liner for proper function.
- Not suitable for applications where the fitting might be subjected to excessive external stress or damage.
- Primarily designed for straight pipe ends; not for complex jointing scenarios.
Setup, Compatibility & Care
Setup: Ensure the end of the 25mm pipe is clean, dry, and free from burrs. If using an MDPE pipe, insert the required MDPE pipe liner (sold separately) fully into the pipe end. Push the pipe, with the liner inserted, firmly into the end of the Plasson Pushfit End Plug until it reaches the internal stop. A secure, leak-proof seal is created automatically.
Compatibility: This 25mm fitting is designed to work with PE, PB, PEX, and Copper pipes. For MDPE pipes, the use of a compatible MDPE pipe liner is mandatory.
Care: The fitting is maintenance-free under normal operating conditions. Periodically check for any external damage to the fitting or the connected pipe. Avoid exposing the fitting to abrasive materials or excessive physical impact.