Best current price£85.95from B&Q
Shopping.co.uk recommended and popular offers
B&Q£85.95Visit shop B&Q - Redwood Fd30 Fire Door Lining Set (T) 32mm (W) 131mm (H) 2.1MPack Of 2
Visit shop1 offer from £85.95
View price history by clicking the chart icon.
The Snowdon Timber Whitewood FD30 Fire Door Lining Set is an ideal solution for homeowners and professional joiners seeking a robust, fire-rated frame for internal doorways. It provides essential structural support and safety compliance for 30-minute fire doors, featuring a versatile design that adapts to common door widths; however, users should note that the timber requires finishing—such as paint, stain, or varnish—prior to installation to ensure long-term durability and protection against moisture.
| Brand | Snowdon Timber |
|---|
No, the set is pre-routed to accept the strips, but the intumescent seals must be purchased separately.
No, this product is specifically designed for internal use only and is not treated for weather exposure.
The head is reversible to suit both 762mm and 838mm wide doors.
No, it is supplied as smooth-planed bare timber ready for you to apply your preferred stain, varnish, or paint.
Yes, it is designed for use with FD30 rated fire doors.
Store the set flat in a cool, dry area away from direct heat sources to prevent the timber from bowing or twisting.
Ensure the lining is securely fixed to the masonry or stud wall using appropriate packers to maintain a plumb, vertical position.
Check that the door stops are not mounted too tightly; adjust the stop position to ensure a 2-3mm gap around the door.
Verify that all surfaces were sealed properly before installation and keep the room humidity levels consistent.
Installation requires basic carpentry tools including a spirit level, saw, and appropriate fixings. The uprights and head should be cut to size based on your specific door opening height. Always seal all six sides of the timber (including cut ends) with a high-quality primer, paint, or wood preservative before fixing to prevent warping due to humidity changes. To install the door stops, wait until the door has been hung to ensure the stop is positioned to allow for a soft, secure close without binding against the door edge. Regular maintenance involves checking the door hinges and the integrity of the intumescent seal annually.
