Best current price£13.99from B&Q
Shopping.co.uk recommended and popular offers
B&Q£13.99Visit shop B&Q - E27 To Gu10 Lamp Socket Converter Adapter Pack Of 6 Ceramic Uk Standard For Led Halogen Cfl Bulbs
Visit shop2 offers from £13.99
View price history by clicking the chart icon.
The LYYT E27 to GU10 Lamp Socket Converter Adapter is an ideal solution for homeowners and DIY enthusiasts looking to transition their existing lighting fixtures to the more versatile GU10 standard without the expense or complexity of professional rewiring. By simply screwing these adapters into your standard Edison E27 sockets, you gain immediate access to a wide range of GU10 LED, halogen, and CFL bulbs. While this provides excellent flexibility for upgrading your home's aesthetic, users should note that the physical length of the GU10 bulb may increase once the adapter is installed, which can occasionally impact fitment in shallow recessed fixtures or lamps with small shades.
| Brand | LYYT |
|---|
The adapter is made of heat-resistant ceramic, but you must always adhere to the maximum wattage rating of the original lamp fixture itself.
The adapter itself is a passive connector and does not affect dimming; dimmability depends entirely on the bulb you choose and your existing dimmer switch.
It depends on the depth. The adapter adds roughly 2-3cm to the length of the bulb, so verify your fixture has enough clearance before installation.
These are designed for indoor use. They should not be used in exposed outdoor fixtures unless protected by a waterproof housing.
The ceramic material is designed to withstand heat, but if you notice the adapter discoloring or smelling like melting plastic, turn off the power immediately and inspect the bulb.
Ensure the adapter is fully seated in the E27 socket and that the GU10 bulb is correctly locked into the adapter's pins.
Check that the center contact point in your E27 socket is clean and making full contact with the base of the adapter.
Use a pair of insulated needle-nose pliers to gently grip the ceramic base of the adapter and rotate it counter-clockwise.
Installation is straightforward: ensure the power is turned off at the main switch, unscrew your existing E27 bulb, screw in the LYYT adapter until it is snug, and then push-and-twist your GU10 bulb into the adapter. Avoid over-tightening the adapter, as this may stress the original socket. These adapters are designed for indoor use only. To maintain, simply wipe the outer shell with a dry cloth periodically to remove dust; never use water or liquid cleaners on any electrical socket components.
