Karcher 3-in-1 Stone Cleaner Detergent 1L - Kärcher - 6.295-765.0

The cleaner is ideal for stone patios, walls, facades, and can also be used on aluminum surfaces. Always test in an inconspicuous area first.

Attach the cleaner bottle to your Kärcher pressure washer using the Plug 'n' Clean system. Apply the cleaner at a low pressure setting, allow it to sit, and then rinse thoroughly with high-pressure water.

Yes, the Kärcher Stone Cleaner contains biodegradable tensides, making it an environmentally responsible choice.

Allow the cleaner to work for a short while, typically a few minutes, before rinsing.

While the cleaner can be used without a pressure washer, it is designed to be used with a Kärcher pressure washer for optimal results.

The 1-liter bottle is ready-to-use. The amount required will depend on the size and condition of the surface. Follow the instructions on the bottle for best results.

Store the cleaner in a cool, dry place away from direct sunlight and extreme temperatures. Refer to the product packaging for specific expiration information.

Ensure the Plug 'n' Clean system is properly attached to your Kärcher pressure washer. Check that the bottle is full and that the intake tube is not blocked.

Make sure you are using the correct pressure setting for your Kärcher model. Allow the cleaner to dwell on the surface for a few minutes before rinsing. Heavily soiled surfaces may require multiple applications.

Rinse the surface thoroughly with clean water, ensuring all cleaner is removed. Consider using a lower pressure setting during application to avoid excessive run-off.