Polypipe Waste Bend - White - 40mm - 45 Degree
Best current price£4.75from City Plumbing GB
Best offers
Shopping.co.uk recommended and popular offers
City Plumbing GB£4.75Visit shop Polypipe White Waste 40Mm Obtuse Bend 45 Degree Ws18w
Visit shopCity Plumbing GB£4.75Visit shop One Offer
1 offer from £4.75
View price history by clicking the chart icon.
City Plumbing GBPolypipe White Waste 40Mm Obtuse Bend 45 Degree Ws18w
Free delivery in 1–3 days
£4.75
Visit shop
Product Information
Full details
This guide is for plumbers, DIY enthusiasts, and building professionals who need a reliable solution for household liquid waste drainage. The Polypipe Solvent Weld Waste (ABS) Obtuse Bend offers a robust and versatile piping component for connecting sanitaryware and kitchen appliances. Its primary benefit is its high operating temperature tolerance and impact resistance, ensuring durability. A potential consideration is the need for solvent cement for installation, which requires proper ventilation and handling.
All features
| Model Part Number | WS18W |
|---|---|
| Brand | Polypipe |
Extended Product Information
FAQs
What type of solvent cement should I use with this ABS bend?
You should use a solvent cement specifically designed for ABS plastic pipework. Always follow the cement manufacturer's instructions for application and curing times.
Can this bend be used for hot waste water?
Yes, ABS material is suitable for higher operating temperatures compared to standard PVC, making it appropriate for typical hot waste water from domestic appliances.
What is the maximum temperature this bend can handle?
While ABS performs at higher operating temperatures than PVC, specific maximum temperature ratings should be confirmed with Polypipe's technical specifications. Generally, it's suitable for standard domestic hot water discharge.
How do I clean this waste pipe fitting?
You can clean the exterior with a damp cloth. For internal blockages, use standard drain unblocking methods appropriate for plastic pipes, avoiding abrasive or overly harsh chemical cleaners.
Is this bend compatible with push-fit waste systems?
No, this is a solvent weld fitting and requires solvent cement for joining. It is not compatible with push-fit systems directly.
What other sizes does the Polypipe Solvent Weld Waste (ABS) range come in?
The ABS range is available in 32mm, 40mm, and 50mm sizes, with various fittings and angles to suit different applications.
Troubleshooting
Joint is leaking after installation
Ensure the correct solvent cement was used and applied properly. Check if the pipe was fully inserted and held in place during initial setting. The joint may need to be redone, ensuring surfaces are clean and cement application is adequate.
Pipe not fully seating into the fitting
Verify that both the pipe end and the fitting socket are free of debris, dirt, or old cement. Ensure the pipe is cut square and deburred. Check for any obstructions inside the fitting.
Slow drainage from connected appliance
The bend itself is unlikely to be the cause if installed correctly. Check for blockages further down the waste system, such as in traps or the main drain line. Ensure no foreign objects entered the pipe during installation.
Pros and Cons
Pros
- Durable ABS material withstands higher temperatures and impacts.
- Secure solvent weld joints prevent leaks.
- Versatile for various domestic waste drainage needs.
- Part of a larger, compatible plumbing system.
- Standard 40mm size ensures broad compatibility.
Cons
- Requires solvent cement for installation, which needs careful handling and ventilation.
- Not suitable for systems requiring push-fit connections.
- ABS can be sensitive to certain aggressive chemicals; check compatibility if transporting unusual waste.
- Limited colour options (white only for this specific product).
Setup, Compatibility & Care
Setup:
- Ensure pipe ends and the fitting socket are clean and dry.
- Apply Polypipe solvent cement evenly to both surfaces using the applicator.
- Immediately push the pipe into the fitting socket with a slight twisting motion until it bottoms out.
- Hold firmly for 30 seconds to prevent movement while the cement sets.
- Allow the joint to cure according to the solvent cement manufacturer's instructions (typically 24 hours for full pressure testing).
Compatibility:
- This 40mm ABS waste bend is designed for use within the Polypipe Solvent Weld Waste System.
- It is compatible with other Polypipe ABS waste pipes and fittings of the same diameter and joint type.
- Can be adapted to MUPVC systems using appropriate transition fittings and jointing methods, though direct ABS-to-MUPVC solvent welding is not recommended without specific guidance.
Care:
- Periodically check exposed waste pipework for any signs of leakage or damage.
- Avoid pouring harsh chemical drain cleaners directly down the waste pipe, as they may degrade ABS over time. Use cleaners designed for plastic pipework if necessary.
- Ensure adequate ventilation during installation when using solvent cement.