SRAM X0 Hub Conversion Caps - 12 x 142mm
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This guide is for cyclists looking to adapt their SRAM X0 hubs to modern standards. The key benefit is seamless conversion to 12 x 142mm thru-axle setups compatible with XD driver bodies, ensuring your existing wheel can be used with newer frames. A potential caveat is ensuring your specific X0 hub model is compatible with these conversion caps.
All features
| Brand | SRAM |
|---|
Extended Product Information
FAQs
Are these caps compatible with all SRAM X0 hubs?
These caps are designed for specific SRAM X0 hubs that are intended for conversion to a 12 x 142mm thru-axle and XD driver body. Always check your hub's original specifications.
Do I need a new driver body if I use these caps?
Yes, these conversion caps are compatible with SRAM XD driver bodies. If your current hub does not have an XD driver body, you will need to replace it separately.
What is the difference between 12 x 142mm and other standards?
12 x 142mm refers to the axle diameter (12mm) and the distance between the outside of the dropouts (142mm). This is a common standard for modern performance bicycles, offering a balance of stiffness and weight.
Can I use these caps with a Boost (148mm) frame?
No, these caps are specifically for the 142mm axle standard. They are not compatible with Boost frames which require a 148mm spacing.
How do I know if my X0 hub is convertible?
Consult your original SRAM X0 hub documentation or contact SRAM support. Generally, hubs designed for conversion will have removable end caps and be specified as compatible with XD drivers.
What tools are needed for installation?
Typically, you may need a pair of pliers or a specialized hub tool to carefully remove the old end caps and install the new ones. A 5mm or 6mm Allen key is usually required for the thru-axle itself.
Troubleshooting
Caps do not fit securely
Ensure you are using the correct conversion caps for your specific SRAM X0 hub model and that no debris is obstructing the fit. Verify you are attempting to install them on a 12 x 142mm hub intended for an XD driver.
Wheel is loose in the frame
Confirm that the conversion caps are fully seated and that the thru-axle is properly tightened according to your frame manufacturer's specifications.
Difficulty installing caps
Ensure the hub body is clean and free of dirt or grease. Sometimes a gentle, even push is required. Avoid forcing the caps, as this could damage them or the hub.
Pros and Cons
Pros
- Enables compatibility with modern 12 x 142mm thru-axle frames.
- Facilitates the use of SRAM XD driver bodies for wider gear ranges.
- Genuine SRAM part ensures quality and a perfect fit.
- Extends the usability of existing SRAM X0 hubs.
- Straightforward installation process.
Cons
- Only compatible with specific SRAM X0 hubs.
- Requires an existing compatible SRAM XD driver body.
- Does not change the hub's other specifications.
- May require specific tools for installation.
Setup, Compatibility & Care
Setup:
- Remove the existing end caps from your SRAM X0 hub.
- Carefully insert the new SRAM X0 Hub Conversion Caps into the respective sides of the hub body.
- Ensure the caps are fully seated and secure.
- Reinstall your wheel into the 12 x 142mm thru-axle frame.
Compatibility:
- Hub Model: Specifically designed for SRAM X0 hubs.
- Axle Standard: Converts the hub to fit a 12 x 142mm thru-axle.
- Driver Body: Compatible with SRAM XD driver bodies.
- Frame Spacing: Suitable for frames with 142mm rear axle spacing.
Care:
- Regularly clean the end caps and hub body with a dry cloth.
- Avoid using harsh solvents, which can damage the finish or materials.
- Periodically check that the caps are securely in place.