DMX ADAPTOR LEAD - Black
Best current price£8.94from B&Q
Best offers
Shopping.co.uk recommended and popular offers
B&Q£8.94Visit shop - Pulse5 Pin Xlr Male To 3 Pin Xlr Female Dmx Adaptor Lead0.22M
Visit shopB&Q£8.94Visit shop One Offer
1 offer from £8.94
View price history by clicking the chart icon.
B&Q - Pulse5 Pin Xlr Male To 3 Pin Xlr Female Dmx Adaptor Lead0.22M
Free delivery in 1–3 days
£8.94
Visit shop
Product Information
Full details
This PULSE DMX Adaptor Lead is designed for lighting technicians and event professionals needing to connect DMX lighting systems with different XLR connector types. Its key benefit is providing a reliable bridge between 5-pin male and 3-pin female XLR DMX ports, ensuring seamless communication between lighting controllers and fixtures. A potential caveat is its specific 0.22m length, which may require longer cables for extensive setups.
All features
| Colour | Black |
|---|---|
| Model Part Number | PLS00348 |
| Brand | PULSE |
Extended Product Information
FAQs
What is the primary function of this adaptor lead?
This adaptor lead converts a 5-pin XLR Male DMX output to a 3-pin XLR Female DMX input, allowing connection between different types of DMX lighting equipment.
Is this lead suitable for audio signals?
No, this lead is specifically designed and wired for DMX lighting control signals only. It is not suitable for audio transmission.
What is the length of the cable?
The cable has a length of 0.22 meters (approximately 8.7 inches).
What are the connector types on each end?
One end has a 5-pin XLR Male connector, and the other end has a 3-pin XLR Female connector.
Can I use this to connect a 3-pin DMX controller to a 5-pin fixture?
No, this adaptor is wired for 5-pin Male to 3-pin Female conversion. For the reverse connection, you would need a 3-pin XLR Male to 5-pin XLR Female adaptor.
Does the wiring differ from a standard XLR cable?
Yes, DMX uses specific pin configurations on the XLR connectors, which this adaptor correctly bridges between the 5-pin and 3-pin standards used in DMX systems.
How robust is the connector construction?
The connectors are made of metal and include rubber strain relief to protect the cable from stress and bending at the connection point, enhancing durability.
Troubleshooting
No DMX signal to lighting fixture
Verify that the adaptor is fully seated in both the controller and fixture ports. Ensure the DMX cable is correctly wired for DMX signal and not for audio. Check that the DMX address settings on both the controller and fixture are correctly configured. Test with a known working DMX cable and adaptor if possible.
Intermittent DMX signal or flickering lights
Inspect the XLR connectors for any debris or damage. Ensure the rubber strain relief is intact and providing support at the connection points. Try a different fixture or controller to isolate the issue. Confirm that the DMX chain is not exceeding the maximum number of devices (typically 32 without a repeater).
Loose connection at XLR port
Gently check if the metal connector housing is bent or damaged. Ensure the rubber strain relief is properly aligned and not obstructing the connection. If the connector feels consistently loose, it may require replacement.
Pros and Cons
Pros
- Enables connection between different XLR DMX port types.
- Robust build quality with strain relief for longevity.
- Compact size minimizes cable management issues for close connections.
- Ensures reliable DMX signal transmission.
- Straightforward plug-and-play functionality.
Cons
- Limited cable length (0.22m) may not suit all installations.
- Only converts between 5-pin Male and 3-pin Female XLR.
- Not suitable for audio or other non-DMX signal types.
Setup, Compatibility & Care
Setup:
- Identify the DMX output port on your lighting controller (typically 5-pin XLR Male).
- Identify the DMX input port on your lighting fixture (typically 3-pin XLR Female).
- Connect the 5-pin XLR Male end of the PULSE DMX Adaptor Lead to the controller's output.
- Connect the 3-pin XLR Female end of the adaptor lead to the fixture's input.
- Ensure all connections are secure.
Compatibility:
- Designed exclusively for DMX (Digital Multiplex) lighting control systems.
- Connects 5-pin XLR Male DMX ports to 3-pin XLR Female DMX ports.
- Not compatible with audio signals or other cable types.
Care:
- Store in a dry environment away from extreme temperatures.
- Avoid excessive bending or kinking of the cable.
- Clean connectors periodically with a dry, lint-free cloth if necessary.
- Ensure rubber strain relief is not damaged.