Varilight Rocker Switches 2-Gang - White

Best current price£5.33from The Range
Best offers
Shopping.co.uk recommended and popular offers
The Range£5.33Visit shop Varilight Xo2w Rocker Switches 2-Gang - Georgian Brass
Visit shop
Best current price£5.33from The Range
Shopping.co.uk recommended and popular offers
The Range£5.33Visit shop Varilight Xo2w Rocker Switches 2-Gang - Georgian Brass
Visit shop3 offers from £5.33 - £6.01
View price history by clicking the chart icon.
The Varilight 2-gang rocker switch is designed for homeowners and contractors seeking a dependable, cost-effective solution for controlling two separate lighting circuits from a single point. Featuring a clean polar white finish, it integrates seamlessly into most modern interiors; however, users should note that this switch is strictly rated for 10A loads, meaning it is unsuitable for high-wattage heavy-duty appliances.
| Colour | White |
|---|---|
| Model Part Number | XO2W |
| Brand | Varilight |
This switch is rated for 10A lighting circuits. If the fan motor current draw is within limits and it is wired appropriately, it may work, but it is primarily intended for lighting.
Yes, it is compatible with standard LED lighting fixtures as long as the total current draw does not exceed 10A.
Yes, standard fixing screws for attachment to a back box are included.
Yes, the switch is designed to be wired as either a 1-way or a 2-way switch.
This switch fits into standard UK back boxes, typically 16mm to 25mm depth depending on wiring volume.
Verify that the wiring matches the 1-way or 2-way configuration requirements and check that all connections are tight.
Check if the switch is properly seated in the wall box and ensure the fixing screws are adequately tightened.
Installation should be performed by a qualified electrician to ensure safety and compliance with local building regulations. Before beginning, always isolate the power supply at the consumer unit.
For care, wipe the faceplate with a dry, soft cloth. Avoid using abrasive cleaners, solvent-based sprays, or excessive water, as these can damage the finish or cause moisture ingress into the electrical terminals.