Shimano HB-RM50 QR hub axle - 108 mm
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
The Shimano HB-RM50 QR hub axle is an essential replacement component designed for cyclists and mechanics looking to maintain or repair compatible Shimano hub systems. It offers the high-quality engineering expected from Shimano, ensuring smooth hub operation and precise wheel security, though users must confirm exact compatibility with their specific hub model before installation to ensure a proper fit.
All features
| Model Part Number | HB-RM50 |
|---|---|
| Brand | Shimano Spares |
Extended Product Information
FAQs
Is this axle compatible with all Shimano hubs?
No, it is specifically designed for the HB-RM50 model. Always check your hub model number before purchasing.
Does this include the quick-release skewer?
This product is the axle only; it does not include the quick-release skewer or the bearings.
Can I use this axle for a non-Shimano hub?
It is not recommended, as thread pitch and hub dimensions vary significantly between manufacturers.
How do I know if my axle is bent?
A bent axle often causes the wheel to wobble or results in inconsistent bearing adjustment, where the wheel feels loose in one position and tight in another.
What tools are required to install this?
You will need a set of cone wrenches, a standard wrench to hold the locknuts, and high-quality bicycle bearing grease.
Troubleshooting
Hub feels gritty or stiff after installation
The cone nuts may be tightened too much against the bearings. Loosen the cones slightly and re-check for smooth rotation without side-to-side play.
Wheel has side-to-side movement (play)
Ensure the locknuts are tightened securely against the cone nuts to prevent the adjustment from shifting during use.
Pros and Cons
Pros
- Ensures factory-standard performance
- High-quality, durable materials
- Precise dimensions for easy installation
- Compatible with standard quick-release systems
Cons
- Limited to specific Shimano hub models
- Requires professional-grade tools for proper tensioning
- Not compatible with thru-axle systems
Setup, Compatibility & Care
To install this axle, remove the wheel from the bicycle and extract the quick-release skewer. Unscrew the locknuts and cone nuts from the old axle, then carefully transfer the bearings or replace them as needed. Insert the new 108 mm axle, ensuring it is centered correctly within the hub shell. Use cone wrenches to adjust the tension so the wheel spins freely without lateral play. For maintenance, periodically inspect the axle for signs of bending or thread damage, and ensure the quick-release mechanism is correctly tensioned whenever the wheel is re-installed on the frame.