Decking Oil, Manufacturer: WooDeeDoo
Best current price£8.99from B&Q
Shopping.co.uk recommended and popular offers
B&Q£8.99Visit shop B&Q - Decking Oil Matt Finish 100Ml Tester Natural Tung & Linseed Outdoor Wood Protector For Garden Decking
Visit shop1 offer from £8.99
View price history by clicking the chart icon.
The WooDeeDoo Decking Oil is designed for homeowners and DIY enthusiasts looking to protect and enhance their wooden decks. Its key benefit is providing durable weather resistance and a natural-looking finish. A potential caveat is that multiple coats may be required for optimal protection, depending on wood type and exposure. This oil penetrates deeply to nourish the wood, preventing cracking and fading while highlighting its natural grain.
| Brand | WooDeeDoo |
|---|
For best protection, two thin coats are generally recommended. The first coat soaks in to nourish the wood, and the second coat provides a protective layer. However, this can vary depending on the wood type and its porosity.
Reapplication is typically needed every 12-18 months, or when you notice water soaking into the wood rather than beading on the surface. Factors like climate and sun exposure can affect frequency.
It is best to remove any existing stain or sealant completely before applying WooDeeDoo Decking Oil. The oil needs to penetrate the bare wood for maximum effectiveness.
Clean your deck with a soft brush or cloth using a mild soap and water solution. Avoid harsh chemicals or abrasive cleaners that could strip the oil finish.
WooDeeDoo Decking Oil is designed to provide a natural, matte finish that enhances the wood's grain. It does not typically leave a glossy or film-forming surface.
The ideal application temperature is between 10°C and 25°C (50°F and 77°F). Avoid applying in direct hot sunlight or when temperatures are expected to drop below 5°C (40°F) during the drying period.
WooDeeDoo Decking Oil is available in various sizes, including tester pots, 1L, 2L, 2.5L, and 5L containers to suit projects of all scales.
Ensure the oil was applied evenly and that excess oil was wiped off after penetration. Too much oil left on the surface can cause blotches. Apply a thinner coat next time or wipe off excess more thoroughly.
This usually happens if too much oil was applied or if it was applied in cold temperatures. Wipe away the excess sticky oil with a cloth dampened with more oil. Ensure adequate ventilation during drying.
Different wood types absorb oil differently. Perform a test patch first to gauge the color change. If a lighter finish is desired, consider lighter-colored oils or a different product.
Preparation: Ensure your wooden deck is clean, dry, and free from dirt, grease, and old finishes. Sand any rough patches if necessary. For previously treated wood, ensure the old finish is completely removed.
Compatibility: Suitable for most common decking woods, including hardwoods (like Ipe, Teak) and softwoods (like Pine, Cedar). Always test on an inconspicuous area first.
Application: Stir the oil thoroughly before use. Apply a thin, even coat using a brush, roller, or lint-free cloth. Work along the grain of the wood. Avoid over-application, which can lead to a sticky surface. Allow the first coat to penetrate for at least 24 hours before applying a second coat if needed.
Care: Clean the deck periodically with a mild soap and water solution. Reapply the decking oil annually or as needed, typically when water no longer beads on the surface.
