Best current price£5.59from eBay
Shopping.co.uk recommended and popular offers
eBay£5.59Visit shop 5pc Rotary Burr Set Rasp Drill Bits Wooden Carving Grinding Polishing 20514
Visit shop3 offers from £5.59 - £7.75
View price history by clicking the chart icon.
The BlueSpot 5 Piece Rotary Rasp Set is an essential accessory kit for woodworkers, model makers, and DIY enthusiasts who need a reliable solution for precision shaping and material removal. Crafted from heat-treated A3 steel, these bits provide excellent durability when working with soft materials like wood and plastic; however, they are not intended for use on hardened metals or masonry, which can cause premature wear to the steel teeth.
| Brand | BlueSpot |
|---|
No, these are designed specifically for soft materials like wood and plastic. Using them on metal will dull the steel teeth very quickly.
They fit any standard die grinder or rotary tool that accepts a 1/4-inch (6.35mm) shank.
No, these are rasp bits used for shaping and removing material. They provide a textured finish rather than a smooth, sanded surface.
Use a lower RPM setting and keep the tool moving constantly. Staying in one spot too long creates friction heat, which causes burning.
A stiff wire brush is the most effective tool to dislodge debris caught between the teeth.
Ensure the shank is centered properly in the collet and that the chuck is fully tightened.
Check if the teeth are clogged with debris. Use a stiff wire brush to clean out any residual material.
Verify that your rotary tool's collet size matches the 1/4-inch shank requirement and check for wear on the collet itself.
Setup is straightforward: simply insert the 1/4-inch shank into the collet of your rotary tool or die grinder and tighten the chuck securely to prevent slippage. Ensure the tool is powered off during installation. Regarding compatibility, these rasps are compatible with any tool accepting a 1/4-inch shank. To maintain the life of your rasps, clean them after every use by brushing away embedded wood or plastic particles with a wire brush. Store the bits in a dry environment to prevent oxidation of the steel, and avoid dropping them on hard surfaces, as impact can chip the fine teeth.
