Bottle Waste Trap - SPARES2GO - 32mm - Chrome Silver - 35mm Pipe

A bottle waste trap, also known as a P-trap or S-trap, is designed to hold a small amount of water to create a seal, preventing sewer gases and odors from entering your home.

Yes, this is a universal bottle waste trap suitable for kitchen sinks, bathroom basins, and urinals with standard 32mm waste outlets.

To clean the compartment, simply unscrew it from the main trap body. Remove any collected debris like hair or soap scum, rinse it, and then reattach it securely.

The waste trap is constructed from chrome-plated brass, providing durability and a silver finish.

The trap diameter is 32mm, the pipe diameter is 35mm, the pipe length is 300mm, the waste seal is 85mm, and the flange is 70mm. It offers a telescopic height adjustment of up to approximately 100mm.

Basic plumbing tools may be helpful for tightening connections, but the trap is designed for relatively easy installation. Hand-tightening is often sufficient for seals, with a gentle final turn for security.

Yes, the outlet pipe length is adjustable to help you achieve the correct fit between your sink and the drainpipe.

Ensure all seals are correctly seated and all connections are hand-tightened, followed by a slight turn with a wrench. Check for any debris on the sealing surfaces.

The waste seal compartment may be blocked. Unscrew it and clean out any accumulated debris such as hair or soap scum. Ensure the pipes are not obstructed.

Verify the waste seal is intact and properly filled with water. Clean the removable waste seal compartment to remove any trapped waste that might be causing odors.

Confirm the existing pipework is standard 35mm. If so, ensure the telescopic height and adjustable outlet are fully utilized. Minor adjustments may require additional standard plumbing connectors.