Best current price£99.00from wilko
Shopping.co.uk recommended and popular offers
wilko£99.00Visit shop Harbour Housewares Weed Control Membrane Roll 2 x 25m with Pegs and Plates Black Fabric for Garden Landscaping and Weed Suppression
Visit shop
B&Q£99.99Visit shop B&Q - 110Gsm Weed Control Membrane Set2M X 100M Coverage (4 Rolls) Heavy Duty Weed Control Fabric Barrier Cover
Visit shop4 offers from £99.00 - £99.99
View price history by clicking the chart icon.
This Harbour Housewares Weed Control Membrane Set is ideal for gardeners and landscapers seeking an effective, chemical-free solution to weed management in outdoor spaces. Its primary benefit is creating a durable barrier that prevents weed growth while allowing essential soil elements to pass through. A potential consideration is its large roll size, which may require careful planning for smaller projects. Key features include a 110gsm permeable membrane, generous 2m x 100m dimensions, and included fixing pegs and plates for secure installation.
| Brand | Harbour Housewares |
|---|
The weed control membrane has a GSM (grams per square meter) rating of 110, indicating its weight and density, which contributes to its durability and effectiveness.
Yes, it can be used as a base layer under paving slabs to prevent weeds from growing through the gaps between slabs, provided the sub-base is stable and properly compacted.
Under normal conditions and when properly covered with mulch or decorative topping, the weed control membrane is designed to last for many years, offering long-term weed suppression.
No, the membrane is designed to be permeable, allowing water, air, and nutrients to pass through, thus supporting soil health and beneficial microorganisms.
Store the roll in a dry, protected area, ideally rolled tightly and covered to prevent UV exposure and dust accumulation. Avoid storing it in direct sunlight.
Yes, you can cut an 'X' or a circle in the membrane and plant directly into the soil beneath. Ensure the edges of the cut are well-secured to prevent weed ingress.
Check for gaps where membrane sections overlap or where it meets edges. Ensure sufficient overlap (10-15cm) and secure these areas properly. Also, verify that the covering material is thick enough (at least 5cm) to completely block sunlight.
Ensure the ground beneath the membrane has adequate drainage. While the membrane is permeable, poor underlying soil drainage can cause water to collect. Slight grading of the ground before installation may be necessary.
Use sharp scissors or a utility knife for cutting. For cleaner edges on subsequent cuts, consider using a hot knife carefully, though this requires caution and proper ventilation.
If the ground is very hard, pre-drilling small pilot holes might help. For very loose soil, use wider plates or additional pegs to distribute the load.
Setup:
Compatibility:
The weed control membrane is compatible with most common landscaping materials, including gravel, bark, wood chips, sand, and soil.
Care:
While the membrane is designed for durability, occasional inspection is recommended. Ensure the covering material remains sufficient to block sunlight and prevent the membrane from being exposed to UV rays, which can degrade the material over time. Minor rips or tears can be repaired with compatible landscape fabric tape if necessary.
