Best current price£17.95from eBay
Shopping.co.uk recommended and popular offers
eBay£17.95Visit shop Penosil DIY Easy Spray Foam Insulation 700ml Can
Visit shop
B&Q£19.95Visit shop B&Q - Diy Easy Spray Foam Insulation 700Ml Can
Visit shop4 offers from £17.95 - £34.19
View price history by clicking the chart icon.
The TAIGA - S1 (PENOSIL EasySpray Foam Insulation) is a DIY sprayable foam sealant designed for individuals seeking excellent thermal and acoustic insulation with superior airtightness. Its key benefit lies in its ability to easily reach complex and hard-to-access surfaces, reducing cold bridges and preventing condensation. A potential caveat is the need for proper application technique to achieve adjustable thickness and unlimited layering effectively. Key features include its spray applicator for easy use, variable thickness control, and suitability for irregular shapes.
| Model Part Number | S1 |
|---|---|
| Brand | TAIGA |
Curing time can vary based on temperature, humidity, and foam thickness. Typically, it becomes tack-free in about 10-20 minutes and fully cures within 24 hours.
Yes, once fully cured, the foam can be painted. Ensure the surface is clean and dry before painting.
The R-value can vary, but closed-cell spray foam insulation generally offers good thermal resistance. Consult the product's technical data sheet for specific R-value information.
It is designed for DIY use. However, ensure adequate ventilation during application and until the foam is fully cured, as isocyanates can be released during the process. Follow all safety instructions on the can.
If there is still product in the can, carefully clean the nozzle. Re-attach the nozzle or a specialized cleaning adapter. Store the can upright in a cool, dry place, away from heat sources. It is best to use the entire can in one session if possible, as resealing can be unreliable.
Yes, the foam provides good acoustic insulation by sealing gaps and dampening sound vibrations.
Ensure the can is adequately warmed and shaken. Check that the nozzle is properly attached and not clogged. If clogged, attempt to clear it with a suitable cleaner or replace the nozzle.
Shake the can more frequently during use. Adjust the distance from the surface and the speed of application. Ensure the nozzle is functioning correctly.
Verify application temperature is within the recommended range. Apply in thinner layers if excessive expansion is a concern. Ensure proper shaking technique for consistent density.
Protect surrounding areas with drop cloths or masking tape before application. Clean up any uncured foam immediately with a compatible solvent cleaner.
Setup: Ensure the can is at room temperature before use. Shake the can vigorously for at least 30 seconds. Attach the applicator nozzle securely. Test spray on a scrap surface before applying to the target area. Hold the can upright and apply foam in sections, allowing for expansion.
Compatibility: This product is generally compatible with most building materials such as wood, metal, concrete, and masonry. Avoid contact with polyethylene, Teflon, and silicone. Always test on an inconspicuous area first.
Care: Uncured foam can be cleaned with a solvent cleaner specifically designed for foam. Cured foam can only be removed mechanically (scraping, sanding). Store cans upright in a cool, dry place away from direct sunlight and sources of ignition. Ensure the nozzle is clear after use or use a cleaning spray if necessary.
