Makita Pruning Shears - DUP361ZN
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
The Makita DUP361ZN is a powerful, battery-powered pruning shear designed for professionals and serious gardeners who need efficient and comfortable pruning. Its key benefit is the 36v power derived from two 18v Lithium-Ion batteries, offering substantial cutting torque and efficiency for demanding tasks. A potential caveat is that batteries and a charger are not included, requiring separate purchase. This tool features a comfortable, slim backpack harness, a 2-stage blade opening adjustment for various branch sizes, and an interlockable blade with the trigger for fluid operation.
All features
| Model Part Number | DUP361ZN |
|---|---|
| Brand | Makita |
Extended Product Information
FAQs
Do I need two batteries to operate the DUP361ZN?
Yes, the Makita DUP361ZN requires two 18v LXT Lithium-Ion batteries to operate, as it is a 36v tool.
What is the maximum branch diameter this tool can cut?
The maximum cutting capacity for the Makita DUP361ZN is 33mm.
Are batteries and a charger included with the DUP361ZN?
No, batteries and a charger are not included with the Makita DUP361ZN. They must be purchased separately.
How do I adjust the blade opening?
The DUP361ZN features a 2-stage blade opening adjustment, typically controlled by a switch or mechanism on the tool body, allowing you to select between two different opening widths.
What is the benefit of the backpack harness?
The comfortable, slim backpack harness is designed to distribute the weight of the batteries and tool evenly, reducing fatigue during extended pruning sessions.
How can I maintain the blades for optimal performance?
After each use, clean the blades with a dry cloth. For persistent residue, use a slightly damp cloth and dry immediately. Sharpen or replace dull blades regularly to ensure clean cuts and prevent strain on the tool.
What does the 'interlockable blade with trigger' feature do?
This feature synchronizes the blade movement with the trigger, providing a smoother, more controlled cutting action that feels similar to using a manual hand pruner.
Troubleshooting
Pruning shears won't turn on
Ensure both 18v LXT batteries are correctly inserted and fully charged. Check that the safety lock lever is engaged and the trigger is pressed correctly. Verify the connection between the tool and the battery harness.
Blade not cutting cleanly or getting stuck
Clean the blades thoroughly to remove sap and debris. Check if the branch exceeds the maximum cutting capacity (33mm). Ensure the blades are sharp; sharpen or replace if dull. Check for any obstructions around the blade mechanism.
Tool stops unexpectedly during use
The electronic current limiter may have engaged due to overload. Release the trigger and allow the tool to cool down. Reduce the pressure applied or wait for the motor to reset. If the issue persists, check for blade obstructions or excessive load.
Reduced cutting power
Check the charge level of both batteries. Partially discharged batteries will reduce performance. Ensure batteries are inserted correctly and making good contact. Clean the blades, as dull or dirty blades increase resistance.
Pros and Cons
Pros
- Powerful 36v performance for tough branches
- Comfortable and ergonomic backpack harness for prolonged use
- Adjustable blade opening suits various branch sizes
- Smooth, controlled cutting action with trigger interlock
- Built-in overload protection for tool longevity
- Clear battery level indicators
Cons
- Batteries and charger are sold separately
- Requires two batteries to operate
- Backpack design may be bulky for very light tasks
- Higher initial cost due to separate battery/charger purchase
Setup, Compatibility & Care
Setup: To set up the DUP361ZN, ensure you have two compatible Makita 18v LXT Lithium-Ion batteries. Insert the batteries into their respective bays on the tool, ensuring they click securely into place. Connect the cord from the tool to the battery harness. The arm band and cord holder should be utilized to keep the connection cord tidy and prevent it from snagging on branches.
Compatibility: This tool is compatible with all Makita 18v LXT Lithium-Ion batteries. Ensure batteries are fully charged before use. The maximum cutting capacity is 33mm, and the maximum blade opening is 54mm.
Care: After each use, clean the blades with a dry cloth to remove sap and debris. For more stubborn residue, a slightly damp cloth can be used, followed by immediate drying. Regularly inspect the blades for sharpness and damage; sharpen or replace as needed. Store the pruning shears in a clean, dry environment. Periodically check the connection points and harness for wear and tear.