Liberon Black Bison Wax Paste Walnut 500ml - MPN: 126882

The typical coverage is between 10-12 square meters per litre, depending on the porosity of the wood and the application method.

While it can be applied to bare wood, it is recommended to prepare the surface first. For best results, consider using a wood conditioner or sealer prior to waxing on raw timber.

Tools such as brushes and steel wool should be cleaned immediately after use with White Spirit.

No, Liberon Black Bison Wax Paste is designed for interior use only and will not provide adequate protection against weather elements.

The wax should be allowed to dry for at least 20 minutes, or until it feels touch-dry, before buffing.

The Walnut variant will impart a subtle warm tone, enhancing the natural color of the wood. It is designed to complement the wood's existing beauty rather than drastically alter it.

It is generally not recommended to apply modern finishes like varnish directly over a wax finish, as the wax can prevent proper adhesion. The product is silicone-free, which helps if you plan to re-wax or apply certain compatible finishes later.

Ensure the wax was applied in a thin, even coat. Buffing may not have been sufficient. Try buffing again with a clean, soft cloth. If severe, gently remove the excess with White Spirit on a cloth, allow to dry, and reapply.

The wax may not have had enough time to dry fully, or too thick a coat was applied. Allow more drying time. If necessary, gently buff with White Spirit on a cloth to remove tackiness, let it dry, and buff again.

Buff more vigorously with a clean, soft cloth. Ensure the surface is completely dry before buffing. A second coat of wax may be beneficial for a deeper shine.

Ensure adequate drying and buffing time was given to the final coat. For increased protection, consider a second coat of wax or a different type of protective finish if extreme durability is required.