Best current price£179.97from eBay
Shopping.co.uk recommended and popular offers
eBay£179.97Visit shop B-G Racing Steering Wheel Quick Release System Adaptor BG4921
Visit shop4 offers from £179.97 - £179.99
View price history by clicking the chart icon.
The B-G Racing Quick Release Steering Wheel Adaptor is designed for automotive enthusiasts who frequently swap steering wheels or require enhanced security. Its primary benefit is the rapid removal and replacement of aftermarket steering wheels, offering a convenient anti-theft solution by allowing complete removal. A key consideration is that it is not compatible with original steering wheels or vehicles equipped with airbags, as replacing the steering wheel will disable airbag functionality.
| Model Part Number | BG4921 |
|---|---|
| Brand | B-G Racing |
No, this adaptor is designed specifically for most aftermarket steering wheels and requires a compatible aftermarket steering wheel boss kit.
No. Replacing a steering wheel on a vehicle with airbags will disable the airbag system. This adaptor should only be used on vehicles with airbags for racing or show purposes where airbag functionality is not required or has been addressed.
To remove the steering wheel, press the push pin mechanism on the adaptor and simultaneously pull the steering wheel away from the adaptor base.
Align the steering wheel with the splines on the adaptor base and push it firmly into place until it clicks or is fully seated. Ensure the push pin engages to lock the wheel securely.
The adaptor is constructed from the highest quality aluminum for maximum durability and usability.
PCD stands for Pitch Circle Diameter, which is the diameter of the circle on which the bolt holes of the steering wheel or boss kit are equally spaced. Common PCDs for aftermarket wheels and boss kits are 70mm and 74mm.
Yes, by allowing the complete removal of the steering wheel when the vehicle is unattended, it serves as an effective anti-theft solution.
Ensure all bolts connecting the adaptor to the boss kit, and the steering wheel to the adaptor, are fully tightened to the manufacturer's specifications. Verify the steering wheel is correctly seated on the adaptor splines.
Check for any debris or obstructions around the push pin and locking collar. Apply a small amount of dry lubricant (e.g., graphite-based) to the moving parts. Ensure the steering wheel is fully engaged with the adaptor to allow the push pin to retract fully.
Double-check the PCD (Pitch Circle Diameter) measurements of both your boss kit and steering wheel against the adaptor's specifications (6x70mm or 6x74mm). Ensure you have the correct adaptor version for your components.
Setup:
Compatibility:
Care:
