Setup, Compatibility & Care Instructions
Compatibility:
- Minimum Base Unit: Requires a minimum cabinet width of 450mm.
- Worktop Cut-out: The sink requires a precise cut-out of 832mm x 472mm.
- Plumbing: Standard kitchen plumbing connections will be required. Ensure compatibility with your existing waste disposal system if applicable.
Setup:
Installation should ideally be performed by a qualified plumber or experienced DIYer. Ensure the worktop is prepared according to the cut-out dimensions. The sink is typically secured from underneath using the provided clips. The mixer tap installation will follow standard procedures, connecting to hot and cold water supplies.
Care:
- Daily Cleaning: Wipe clean with a soft, damp cloth. Mild dish soap can be used for everyday grime.
- Stubborn Stains: For tougher marks, use a non-abrasive cleaner specifically recommended for composite or granite sinks. Avoid harsh chemicals, abrasive pads, or steel wool, as these can damage the finish.
- Tap Maintenance: Periodically check the pull-out hose for kinks. Clean the spout aerator if water flow becomes irregular.
- Avoid: Do not use bleach or drain unblockers containing harsh chemicals directly in the sink, as they may affect the material's integrity and colour.