Cheshire Mouldings Natural Pine Internal Door Lining Set - Brown

Door lining is used to protect and support the walls surrounding doors, preventing damage and providing a clean, finished look to door frames.

Yes, the natural pine can be sanded, primed, and painted or varnished to match your desired decor.

Yes, it is designed to protect walls in high-traffic areas from daily wear and tear, including impacts from children and pets.

You will typically need a measuring tape, a fine-tooth saw for cutting, wood adhesive, and a hammer or nail gun for fixing. A level and sandpaper are also recommended.

Clean the surface with a soft, damp cloth. Avoid using harsh or abrasive cleaning chemicals.

Specific dimensions should be checked with the product packaging or retailer, as this information is not detailed in the product description. Typically, door lining comes in standard lengths and profiles.

The product description focuses on the lining material itself; fixings like nails or screws are usually sold separately.

Ensure the wall surface is even. Sand down any unevenness on the lining or wall. Use a wood filler to bridge small gaps before painting/varnishing.

Use a sharp, fine-tooth saw for cuts. Pre-drill pilot holes before nailing to prevent the pine from splitting. Use appropriate length nails that do not penetrate too deeply.

Ensure the wood is properly sanded and free of dust before applying finish. Apply thin, even coats of paint or varnish, allowing adequate drying time between coats.

Check that sufficient adhesive was used and that nails/screws are securely fastened. If the wall is uneven, additional adhesive or fixing points may be necessary.