Tetrion Powerfil - 600g
Best current price£27.99from B&Q
Best offers
Shopping.co.uk recommended and popular offers
B&Q£27.99Visit shop B&Q - Powerfil 2K 2 Part Body Filler Lightweight Tough Smooth White 600G X 3
Visit shopB&Q£27.99Visit shop All Offers
3 offers from £27.99 - £28.99
View price history by clicking the chart icon.
B&QB&Q - Powerfil 2K 2 Part Body Filler Lightweight Tough Smooth White 600G X 3
Free delivery in 1–3 days
£27.99
Visit shop
eBayTetrion Powerfil 2K 2 Part Body Filler Lightweight Tough Smooth White 600g x 3
Free delivery in 1–3 days
£27.99
Visit shop
Tetrion Powerfil 2K 2 Part Body Filler Lightweight Tough Smooth White 600g x 3Free delivery in 1–3 days£28.99Visit shop →
Product Information
Full details
The Tetrion Powerfil (600g) is a versatile, super-smooth filler for DIY enthusiasts and professionals tackling both large and small repair jobs. Its key benefit is rapid setting (minutes) and easy sanding, resulting in a tough, smooth finish suitable for various materials. A caveat to be aware of is its sensitivity to temperature, which affects setting times.
All features
| Model Part Number | TPW600 |
|---|---|
| Brand | Tetrion |
Extended Product Information
FAQs
What is the ideal temperature for using Tetrion Powerfil?
Tetrion Powerfil is best used in warm, dry, well-ventilated conditions, ideally around 18 degrees C (65 degrees F). Temperature significantly impacts setting and curing times.
How much hardener should I use?
Always use a strict ratio of 1 part hardener to 50 parts filler (approximately 2%). Never use too much hardener, as this can lead to premature curing and brittle results.
Can I use Tetrion Powerfil on painted surfaces?
Yes, as long as the painted surface is sound and clean. For best results, lightly sand the painted area to provide a key for the filler to adhere to.
How long does it take to become fully sandable?
At an ambient temperature of 18 degrees C (65 degrees F), the filler will be fully cured and sandable after approximately 20 minutes.
What materials can I use Tetrion Powerfil on?
It is suitable for use on metal, wood, stone, and most plastics.
What happens if I mix too much filler?
Only mix the amount of filler that you can apply immediately, as the setting reaction begins within 5 minutes. Never return unused mixed paste to the tin; dispose of it safely.
How should I store unused filler paste?
Keep the unused filler paste cool in the summer and warm in the winter to maintain its optimal consistency. Ensure the tin is tightly sealed.
Troubleshooting
Filler not setting or setting too slowly
Ensure the correct mixing ratio of 1 part hardener to 50 parts filler is used. Check that the ambient temperature is within the recommended range (ideally around 18°C/65°F). In very cold conditions, the curing time will be significantly longer.
Filler is difficult to sand
Wait for the filler to be fully cured before sanding. If it is still gummy or excessively hard, the mixing ratio may have been incorrect, or the temperature was too high during application, causing it to cure too rapidly.
Poor adhesion to the surface
The surface was likely not prepared correctly. Re-clean the area thoroughly, ensuring all dirt, grease, moisture, and loose material are removed. A light abrasion of the surface can also improve adhesion.
Filler cracking after application
This can occur if too much filler is applied in a single layer or if the surface flexes. For larger areas, apply in thinner layers, allowing each to cure. Ensure the underlying material is stable.
Pros and Cons
Pros
- Fast curing time allows for quick repairs.
- Produces a smooth, easily sandable surface.
- Adheres well to a variety of common materials.
- Kit includes essential tools for application.
- Durable and tough repair once fully cured.
Cons
- Setting time is highly dependent on ambient temperature.
- Requires precise mixing ratio to avoid issues.
- Not suitable for return of unused paste to the tin.
- Best used in warm, dry, well-ventilated conditions.
- Imperfections require a second application only after the first has cured.
Setup, Compatibility & Care
Preparation is Key: Before application, thoroughly clean the surface to be treated, removing all dirt, grease, moisture, and loose material. Ensure all mixing equipment is clean to prevent contamination.
Mixing Instructions: Combine 1 part hardener with 50 parts filler (approximately a pea-sized amount of hardener to a golfball-sized amount of filler). Mix thoroughly until no streaks are visible and the hardener is fully dispersed. Only mix the amount you can use immediately.
Application: Apply the mixed filler directly to the prepared area using the provided spreader. Work quickly as the setting reaction begins within 5 minutes.
Curing: The filler will be fully cured and sandable after approximately 20 minutes at 18°C (65°F). Cooler temperatures will extend this time; warmer temperatures will shorten it.
Sanding: Sand the cured filler down to the desired level. If imperfections remain, allow the existing application to fully cure before applying additional filler.
Compatibility: Tetrion Powerfil is suitable for use on metal, wood, stone, and most plastics.
Storage: Keep the paste cool in summer and warm in winter to maintain optimal consistency. Never return unused mixed paste to the original tin.