Hotpoint Washing Machine - 9kg Load - A Energy Rating

Locate the filter at the bottom of the machine. Open the small access door, unscrew the filter, and remove any lint or debris. Rinse the filter under running water and replace it securely.

You can use liquid detergent or powder detergent that is designed for washing machines. Follow the manufacturer's instructions for the correct dosage.

Select your desired wash program, then press the 'Delay Start' button. Use the arrow buttons to set the desired delay time (in hours), then press 'Start'.

The Anti-Stain cycle removes common stains without pre-treating clothes. This cycle uses an hour-long, 40°C wash to remove stains.

The Steam Hygiene cycle uses steam to reduce bacteria and allergens, leaving clothes fresher and softer.

After each wash, leave the washing machine door ajar to allow the interior to dry. Run a drum cleaning cycle periodically to prevent buildup.

The model number (NSWF 946 GG UK) is located on a sticker on the back of the machine, or on the door frame.

Warranty information can be found on the product documentation.

Check if the machine is properly plugged into a working outlet. Check the fuse.

Ensure the machine is level. Reduce the load if overloaded, and redistribute the clothes.

Check the drain hose for kinks or blockages. Clean the pump filter.

Make sure the water supply taps are fully open. Check the inlet hoses for kinks or blockages.

Clean the detergent dispenser. Ensure that the detergent is not clumped or hardened.