Hoover H-Wash & Dry 300 Integrated 8 kg Washer Dryer - E

Remove the detergent dispenser and wash it under warm running water. Use a soft brush to remove any detergent residue.

Clean the filter regularly, typically after each drying cycle or when you notice a reduction in performance.

KG Mode automatically adjusts the cycle time, water, and energy consumption based on the load size.

Select the desired wash cycle, set the delay time using the controls, and press start. The machine will begin the cycle after the set delay.

The appliance offers various drying programs, including Wool.

The warranty period is 1 year.

Consult the user manual for the specific error code and follow the troubleshooting steps. If the issue persists, contact Hoover customer support.

Check that the appliance is plugged in and the power outlet is working. Ensure the door is closed properly and that the child lock is not activated.

Check the drain hose for blockages. Also, inspect and clean the drain pump filter.

Ensure you have not overloaded the machine. Clean the lint filter. Check the selected drying program and that the water supply is adequate.

Check that the appliance is level. Ensure that no foreign objects are trapped in the drum. Reduce the load if overloaded.

Consult the user manual for the specific error code to understand the issue and the recommended solution. You can also try to reset the machine by turning it off and unplugging it for a few minutes before trying again.