Bike Rear Cassette Cog Remover Tool - Freewheel Socket for Hub Repair - Laxzo - JE97
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This Laxzo Bike Rear Cassette Cog Remover Tool is designed for cyclists and home mechanics who need a reliable tool for hub repair and cassette removal. Its primary benefit is its durable construction and wide compatibility, ensuring efficient maintenance. A potential caveat is that it requires a separate wrench for operation. Key features include hardened tool steel construction, compatibility with common freehub standards, and a compact design.
All features
| Model Part Number | JE97 |
|---|---|
| Brand | Laxzo |
Extended Product Information
FAQs
What types of freehubs does this tool support?
This tool is compatible with Shimano HG, Shimano UG, and Sunrace freehubs.
What size wrench do I need to use with this tool?
You can use either a 24mm socket wrench or an adjustable wrench with this tool.
Can this tool be used for bottom bracket installation?
Yes, it is suitable for 20-tooth wedge type bottom brackets and Shimano or other brand wedge bottom brackets.
Is the tool heavy?
No, the tool features a lightweight design for easy transport and storage.
What material is the tool made from?
The tool is constructed from hardened and tempered tool steel for durability.
Does this tool come with a wrench?
No, the tool requires a separate 24mm socket wrench or adjustable wrench for operation.
Troubleshooting
Tool slips on the lockring.
Ensure the tool is fully seated on the lockring. If the lockring is heavily worn, replacement may be necessary. Use firm, steady pressure with the wrench.
Difficulty removing a tight cassette.
Apply a penetrating lubricant to the lockring and allow it to sit for a while before attempting removal. Ensure you are using the correct leverage with your wrench.
Tool does not fit the bottom bracket.
Verify that your bottom bracket is a 20-tooth wedge type and compatible with Shimano or similar wedge designs. This tool is not for all bottom bracket types.
Pros and Cons
Pros
- Constructed from hardened and tempered tool steel for excellent durability.
- Compatible with a wide range of common freehub standards (Shimano HG, UG, Sunrace).
- Can be used with standard 24mm socket or adjustable wrenches.
- Lightweight and compact design for easy portability and storage.
- Also suitable for specific types of bottom bracket installation/removal.
Cons
- Requires a separate wrench (24mm socket or adjustable) for operation.
- May not be compatible with all non-standard or very old freehub systems.
- Specific bottom bracket compatibility is limited to 20-tooth wedge types.
Setup, Compatibility & Care
Setup:
This tool does not require complex setup. It is designed to interface directly with cassette lockrings or compatible bottom brackets. Ensure you have the appropriate wrench (24mm socket or adjustable wrench) ready.
Compatibility:
- Freehubs: Shimano HG, Shimano UG, Sunrace.
- Bottom Brackets: 20-tooth wedge type, Shimano or other brand wedge type.
- Wrenches: 24mm socket wrench or adjustable wrench.
Care:
After use, clean the tool with a dry cloth to remove any grease or debris. Store in a dry place to prevent rust. Periodically inspect for any signs of wear or damage to ensure continued effectiveness.