Best current price£52.50from The Range
Shopping.co.uk recommended and popular offers
The Range£52.50Visit shop Där Lighting Abacus 4 Light Flush Crystal And Polished Chrome - White
Visit shop4 offers from £52.50 - £101.99
View price history by clicking the chart icon.
The DAR Abacus 4 Light Flush fitting is designed for homeowners seeking a touch of elegance and sparkle in their living spaces. Its key benefit is providing bright, diffused illumination with a decorative crystal accent, enhancing room ambiance. A potential consideration is its flush-mount design, which may have limited clearance for complex wiring in some older fixtures. This lighting solution features a polished chrome base adorned with clear crystal glass droppers, offering a glamorous look that is ready for immediate installation.
| Colour | Silver |
|---|---|
| Model Part Number | 25026338 |
| Brand | Dar |
The dimmability of this fixture depends on the bulbs you use. If you install dimmable bulbs and have a compatible dimmer switch installed on your wall circuit, then yes, it can be dimmed.
The DAR Abacus 4 Light Flush fitting typically requires E27 screw bulbs. Please refer to the product packaging or the fixture itself for the exact bulb type and maximum wattage allowed.
This is a 4-light fitting, meaning it is designed to hold four individual bulbs.
This fixture is designed for indoor use in dry locations. It is not recommended for use in bathrooms or other damp environments due to potential moisture exposure.
Bulbs are typically not included with lighting fixtures. Please check the product packaging to confirm.
The exact weight can vary, but the combination of the metal base and crystal droppers means it has a moderate weight. Ensure your ceiling can adequately support its weight and use appropriate fixings.
Warranty information is usually detailed on the product packaging or with the purchase receipt. Please refer to those documents for specific warranty terms and duration.
Ensure the power is switched off. Check that all bulbs are screwed in correctly and are not burnt out. Verify all wire connections are secure and aligned with the appropriate terminals. If the issue persists, consult a qualified electrician.
Confirm that all four bulbs are installed and functioning. Check the maximum wattage rating for the fixture and ensure it is not exceeded. Clean the crystal elements, as dust and smudges can diffuse light. Consider using higher lumen bulbs if more brightness is needed.
Turn off the power supply. Re-tighten the mounting screws securing the fixture base to the ceiling. Ensure the ceiling structure is sound enough to support the fixture's weight.
Setup:
This fitting comes fully assembled, significantly easing the installation process. Ensure the main power supply is switched off at the breaker before beginning any electrical work. Mount the base securely to the ceiling using appropriate hardware (not always included, check packaging). Connect the wiring according to local electrical codes and manufacturer instructions. Once wiring is complete and secure, attach the crystal droppers as per any provided guide, or if pre-attached, ensure they are stable.
Compatibility:
This fixture is compatible with standard E27 screw bulbs (check specific bulb type and wattage limits on the fixture or packaging). For optimal light output and aesthetic, consider using clear or warm white LED bulbs. It is designed for indoor use in dry locations.
Care:
To maintain its appearance, dust the crystal elements regularly with a soft, dry cloth. For tougher smudges, a slightly damp microfiber cloth can be used, followed by a dry cloth. Avoid abrasive cleaners or solvents, as they can damage the chrome finish and crystals. Periodically check that all screws and fittings remain tight, especially after initial installation.
