HJC HJ-45B F100 Motorcycle Helmet Pinlock Insert - Clear

This Pinlock insert is designed exclusively for the HJC HJ-45B visor, which is found on certain HJC F100 helmet models (sizes L, XL, 2XL).

Gently clean the insert with a soft, damp cloth. Avoid using harsh chemicals or abrasive materials that could damage the surface.

No, it is specifically designed only for the HJC HJ-45B visor. Always verify your helmet's visor model before purchasing.

The Pinlock system creates a sealed air gap between the main visor and the insert, acting as insulation. This prevents warm, moist air from the rider's breath from condensing on the cold visor surface.

Yes, installation is designed to be straightforward. It involves aligning the insert with the pre-installed mounting pins on the visor and pressing it into place.

The model number associated with this Pinlock insert is DKS587.

Ensure the Pinlock insert is securely attached to the visor and that a proper seal is formed. Clean both the visor and the insert. Check that the mounting pins are fully engaged.

Make sure you are using the correct HJC HJ-45B visor. Verify that the mounting pins on the visor are clean and unobstructed. Apply gentle, even pressure during installation.

Clean the insert carefully with a soft, damp cloth. If scratches are deep, the insert may need replacement to ensure optimal clarity.

This indicates a loss of seal. Re-seat the Pinlock insert, ensuring it is firmly attached to the mounting pins. Check the condition of the rubber seal on the Pinlock insert.