Satin 120 ml Ultimate Glaze Water Based Acrylic Varnish - Cadence - White

This water-based varnish creates a high quality protection and film layer and is used for protecti...

Best current price£6.65from Go Craft

One Offer

1 offer from £6.65

View price history by clicking the chart icon.

Go CraftSatin 120 ml Ultimate Glaze Water Based Acrylic Varnish Satin
£3.95 delivery
£6.65
Visit shop

Product Information

Full details

This Cadence Satin Ultimate Glaze is ideal for crafters seeking a durable, water-based protective finish for various projects, excluding cracking techniques. It offers a high-quality film layer that provides waterproof protection and adheres well to multiple surfaces. While versatile, its incompatibility with cracking techniques is a key consideration.

All features

ColourWhite
Model Part NumberCA768040
BrandCadence

Extended Product Information

FAQs

What surfaces can I use this varnish on?

This varnish adheres well to a variety of surfaces including wood, paper, canvas, ceramic, terracotta, and many types of plastic. Always ensure the surface is clean and dry before application.

Can I use this varnish for cracking techniques?

No, this varnish is specifically not recommended for use with cracking techniques, as it provides a durable, waterproof film that will prevent cracking mediums from working correctly.

How do I clean up my brushes after using the varnish?

Clean your brushes, sponges, or applicators immediately after use with soap and water. Water-based formulas make cleanup straightforward.

What kind of finish does this varnish provide?

This varnish provides a satin finish, which is a smooth, low-sheen look that is neither high gloss nor completely matte.

Is this varnish waterproof once dry?

Yes, once fully cured, the varnish creates a waterproof film layer, offering excellent protection against moisture.

How long does it take to dry?

Drying time can vary, but typically each thin coat takes 1-2 hours to dry to the touch. Full curing may take longer. Ensure adequate drying time between coats for best results.

Is the varnish toxic?

No, the product is described as non-toxic, making it suitable for general crafting use.

Troubleshooting

Varnish is sticky or tacky after drying

This can occur if applied too thickly or in high humidity. Ensure thin coats are applied and allow adequate drying time between coats. If minor tackiness persists, a very light sanding with fine-grit sandpaper may help, followed by a thin clear coat.

Brush strokes are visible

Apply the varnish in thin, even coats using a high-quality, soft brush. Work in one direction. Avoid over-brushing. If brush strokes are prominent, consider a second thin coat applied in the opposite direction or explore using a sponge applicator.

Air bubbles are present in the finish

Avoid shaking the varnish. Stir gently to mix. Ensure the surface is clean and free of dust. Apply in thin coats and avoid excessive brushing. If bubbles appear, you may need to lightly sand the surface once dry and reapply a thin coat.

Varnish is cloudy or milky

Ensure the varnish is fully dry. Cloudiness can sometimes indicate insufficient drying time or exposure to moisture before fully cured. Check storage conditions; extreme cold can sometimes affect water-based products, though they typically recover upon warming.

Pros and Cons

Pros

  • Provides durable, waterproof protection.
  • Adheres well to a wide range of materials.
  • Easy water cleanup.
  • Non-toxic formula.
  • Versatile for various crafting applications.

Cons

  • Not suitable for use with cracking techniques.
  • Requires a dry, clean surface for optimal adhesion.
  • May alter the appearance of very delicate or porous materials if applied too heavily.

Setup, Compatibility & Care

Setup:

  1. Ensure the surface you intend to varnish is clean, dry, and free from dust, grease, or debris.
  2. Stir the varnish gently before use. Do not shake, as this can create air bubbles.
  3. Apply using a soft brush, sponge, or spray applicator in thin, even coats.
  4. Allow each coat to dry completely (typically 1-2 hours, depending on humidity and application thickness) before applying subsequent coats.

Compatibility:

  • This varnish is compatible with most acrylic paints, paper, wood, ceramic, terracotta, and some plastics.
  • It is not suitable for use with cracking mediums or techniques, as it will interfere with their intended effect.
  • Test on a small, inconspicuous area if unsure about compatibility with a specific material.

Care:

  • Clean brushes and tools immediately after use with soap and water.
  • Store the varnish in its original container with the lid tightly sealed in a cool, dry place, away from direct sunlight and extreme temperatures.
  • Wipe away dust from sealed surfaces with a slightly damp cloth. Avoid harsh cleaning agents.

Similar items

Price History

DatePrice
Visit shop