Lumatic Industrial Air Operated Continuous Flow Grease Gun - UTTK10487

This gun is designed for standard 400g grease cartridges. It can also be used with up to 500g of bulk grease.

The recommended air pressure for this grease gun is between 4-10 bar.

It is supplied with a rigid tube, precision connector, and a UK standard air coupling. You will need an air compressor and air line to operate it.

Yes, its continuous flow and high pressure ratio make it suitable for both demanding industrial machinery and regular automotive maintenance.

To use bulk fill, you typically remove the cartridge and any internal mechanism (if applicable) and fill the barrel directly with grease before reassembling. Refer to specific instructions if provided with the unit for bulk loading procedures.

This product is usually dispatched within 2 working days, though dispatch times can vary.

Check that the air pressure is within the recommended 4-10 bar range. Ensure the grease cartridge is properly seated or the bulk fill is adequate. Verify the precision connector is securely attached to the lubrication point.

Inspect the air coupling for damage or wear. Ensure it is securely connected to the air line. Replace the coupling if damaged.

Ensure the follower rod is fully retracted before inserting the cartridge. Check for any obstructions inside the barrel.

Confirm that the air supply is connected and the pressure is adequate. Check for any blockages in the rigid tube or precision connector. Ensure the trigger mechanism is fully engaged.