Rustins Wood Oil - Clear - 500Ml

Penetrating Oil: This water-based wood oil deeply penetrates wooden furniture to nourish and prote...

Best current price£19.00from B&Q

All Offers

4 offers from £19.00

View price history by clicking the chart icon.

B&QB&Q - Water Based Wood Oil Clear Quick Drying Furniture Treatment 500Ml
Free delivery in 1–3 days
£19.00
Visit shop
OnBuy.comRustins Water-Based Wood Oil Clear Quick Drying Furniture Treatment 500Ml 5015332005840
Free delivery in 1–3 days
£19.00
Visit shop
The RangeRustins Water-Based Wood Oil Clear 500Ml - Clear
Free delivery in 1–3 days
£19.00
Visit shop

Product Information

Full details

The Rustins Wood Oil - Clear - 500Ml is designed for DIY enthusiasts and homeowners seeking to nourish, protect, and enhance their interior and exterior wooden furniture. Its key benefit is providing a deep, natural finish that dries quickly, minimizing disruption. A potential consideration is that it is food-safe only once fully cured, requiring patience before use on food-contact surfaces.

All features

Model Part NumberWDOIL500
BrandRustins

Extended Product Information

FAQs

How long does it take for the oil to fully cure?

Full cure typically takes 24-48 hours, depending on environmental conditions. It is food-safe once fully cured.

Can I use this on a kitchen countertop?

Yes, it is suitable for kitchen countertops and other food-contact surfaces once it has fully cured.

How often should I reapply the wood oil?

Reapplication frequency depends on usage and environmental exposure. For interior items, a light coat every 6-12 months is usually sufficient. For exterior items, more frequent application may be needed.

What is the difference between this oil and a varnish?

This wood oil penetrates the wood to nourish and protect from within, maintaining a natural feel. Varnish typically forms a protective layer on the surface.

Does this oil provide waterproofing?

The oil provides a good level of water resistance by sealing the wood grain, but it is not a complete waterproofing solution for prolonged submersion.

Can I tint this wood oil?

This product is a clear oil and is not designed to be tinted. For coloured finishes, a different product would be required.

How should I store the remaining oil?

Store in a cool, dry place away from direct sunlight and frost. Ensure the lid is tightly sealed.

Troubleshooting

Uneven finish or 'patchy' appearance

Ensure excess oil was fully wiped off after application. Apply another thin, even coat and be sure to wipe off all residue thoroughly.

Wood still looks dry after application

The wood may be very porous or dry. Apply additional coats, allowing sufficient drying time between each, and ensure all excess is wiped away.

Slight tackiness after drying

This can occur if too much oil was applied or if excess was not wiped off completely. Allow more time to cure, or lightly buff with a fine steel wool (0000 grade) and re-wipe.

Pros and Cons

Pros

  • Nourishes and protects wood deeply.
  • Fast drying time reduces project duration.
  • Easy wipe-on application for a natural finish.
  • Environmentally conscious with minimal VOCs.
  • Offers protection against UV light damage.
  • Safe for use on food-contact surfaces once cured.

Cons

  • Requires adequate drying time before food contact.
  • May require multiple coats for desired protection on very dry wood.
  • Not suitable for use on sealed or painted surfaces.

Setup, Compatibility & Care

Preparation:

  1. Ensure the wooden surface is clean, dry, and free from dust, grease, and existing finishes.
  2. Lightly sand the wood with fine-grit sandpaper if necessary and wipe away dust.

Application:

  1. Apply the oil liberally using a clean cloth or brush.
  2. Allow the oil to penetrate the wood for a few minutes.
  3. Wipe away any excess oil with a clean, lint-free cloth.
  4. Allow to dry for at least 30 minutes before applying a second coat, if desired.

Compatibility:

  • Suitable for all types of interior and exterior bare or previously oiled wood.
  • Not recommended for use over paint, varnish, or other sealed finishes.

Care:

  • Clean tools and spills immediately with water.
  • For ongoing maintenance, reapply a light coat of oil as needed, typically once or twice a year depending on exposure.
  • Ensure the product is fully cured before placing food-contact items on treated surfaces (refer to curing times on the product label).

Price History

DatePrice
Visit shop