Best current price£126.00from eBay
Shopping.co.uk recommended and popular offers
eBay£126.00Visit shop 12 X U-Pol HIGH5 1K Ready For Use GREY High Build Primer Paint 450ml UPOL
Visit shop2 offers from £126.00 - £127.49
View price history by clicking the chart icon.
The U-Pol HIGH5 1K High Build Primer Paint is an ideal solution for automotive DIY enthusiasts and professional body shop technicians performing spot or smart repairs. It offers a significant time-saving advantage by providing high-build coverage and excellent sanding properties, ensuring a smooth substrate for topcoats. While it excels at filling minor imperfections, users should note that as a 1K product, it is intended for localized touch-ups rather than full vehicle refinishing.
| Colour | Grey |
|---|---|
| Model Part Number | HIGHG/AL |
| Brand | U-Pol |
| Container Volume | 450ml |
Yes, provided the surface is properly cleaned and prepared with an appropriate plastic adhesion promoter.
This is a primer, not a topcoat; it must be covered with a suitable automotive paint or topcoat system.
While it is fast drying, it is best to allow the primer to fully harden according to the environmental conditions, typically 30-60 minutes depending on humidity and temperature.
It is compatible with most standard automotive basecoat and single-stage paint systems.
For initial leveling, 400-600 grit is usually sufficient, followed by a finer grit like 800 for a smooth finish before painting.
Remove the nozzle and soak it in a solvent-based cleaner or replace it if necessary.
Hold the can further away from the surface and apply thinner, more frequent coats.
You are applying too much paint at once; allow more flash-off time between coats and reduce the volume applied per pass.
Before application, ensure the surface is clean, dry, and free from oil or wax. Shake the can vigorously for at least two minutes until the mixing ball rattles freely. Hold the nozzle 15-20cm from the surface and apply using smooth, sweeping motions. Always test the spray pattern on a scrap piece of metal first to gauge the output. For maintenance, invert the can after use and spray for a few seconds to clear the nozzle mechanism, preventing clogs for future use. Store the canister in a cool, dry environment, away from direct heat or open flames.
